Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need confirmation of the "switchport access vlan" command below when the interface is configured as a trunk.If a PC is connected to this interface, and it isn't trunking, traffic will be sent on VLAN 53 (Native)... right?so, therefore, the "switchp...
LLQ in our policy-map;R1(config-pmap-c)#priority 1024I understand that when the link is congested;-its servers traffic for this queue first-it also polices this queue to 1024kbpsBut what happens when the interface is not congested, and I send 2048kbp...
I understand that the “priority-queue out†interface command creates a expedite queue for that interface, and this queue is emptied first before the other queues.Does it do this even when the interface isn't congested?
Hi all.I'm having an issue all our 3750's (45 in total) connected to our 6509's (CatOS).The 3750's are connected to the 6509s via fibre. on G1/0/1 and G1/0/4, using flexlink, G1/0/1 is that active linkOn every switch, G1/0/1 shows input/CRC errors...
Hi. I'm having a problem with clients connecting to other clients or devices on the same subnet they are on.It might have something to do with ARP. As when i ping another device on the client, the ARP entry shows as '00-00-00-00-00-00 invalid' (...
OK.. i've done furthure investigationI enabled 'debug arp all enabled" and i got this message when the device tries to ping the gateway:Tue Aug 28 19:08:58 2007: dtlArpFindClient:ARP look-up for 10.1.23.1 failed (not a client).Tue Aug 28 19:08:58 20...
Thanks for the repliyYes, the AP and WLC controller are on different subnets.I have manually confiured the AP with a static IP.I did a 'debug lwapp events enable' on the WLC and get this messageWed May 23 08:20:12 2007: Discarding L3 Mode LWAPP DISCO...
