Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About ramonito.b.escarro
Stats
Member since
07-01-2011
16
Posts
0
Helpful
0
Solutions
Created by
ramonito.b.esca
in IP Telephony and Phones
in IP Telephony and Phones
05-15-2012
06:11 PM
05-15-2012
06:11 PM
Hi Tere, I have made an upgrade to 8.5 from 2.3 and migrated my license. I applied the patch for the 2.3 license to be used but it seems to be not working at all as I am still being prompted that I am using evaluation license. I have also emailed licensing team but they practically told me to order for a license upgrade. So basically we need to pay for that upgrade. In my own opinion this is just not right, for software that supports CUCM, UCONN, UCCX, etc. versions 8.0 will not support software update to cover up to latest realease. If the client only requires CUCM, UCONN and UCCX upgraded, they also need to upgrade the Management Suite which is not free at all. The software should still use 2.3 but will be updated to cover 8.6 platforms. Regards, Ramon
... View more
Created by
ramonito.b.esca
in IP Telephony and Phones
05-14-2012
06:03 PM
05-14-2012
06:03 PM
Hi Tere, Thanks for the reply it was helpful. By the way, I would also like to check about licensing for the upgrade from 2.3 to 8.6. Any idea if I need to buy new licenses or just need to rehost my old license through licensing@cisco.com Thanks, Ramon
... View more
Created by
ramonito.b.esca
in IP Telephony and Phones
05-14-2012
12:31 AM
05-14-2012
12:31 AM
Hi All, I would like to get some help with regard to our latest updates on the CUCM to 8.6.2.20000-2 from 8.0.3. The upgrade had no problem and went smoothly. We have the Management Suite software with Unified Operations Manager and Unified Service Monitor versions 2.3. The problem is with Operations Manager 2.3 as the Service Level View Drawing was gone. I doubled check the monitored devices and found out the CUCM is now an Unknown MDF type. I do have some of those problems before the update but those are for my switches (Nexus 5K, C4507 with Sup7-E, Gateways 2921 and 3921 Routers, etc.) are all showing unknown MDF type, but I did not bother because the CUCM 8.0.3 cluster was showing. Anyone got any idea how to fix this issues? Thanks, Ramon
... View more
Labels:
Created by
ramonito.b.esca
in Routing
02-13-2012
04:55 PM
02-13-2012
04:55 PM
Hi, I plugged in two PSU with 750W router#sh envi SYSTEM POWER SUPPLY STATUS ========================== Internal Power Supply Type: AC Internal Power Supply 12V Output Status: Normal External Redundant Power Supply is present and available to backup the system. SYSTEM FAN STATUS ================= Fan 1 OK, Low speed setting Fan 2 OK, Low speed setting Fan 3 OK, Low speed setting Fan 4 OK, Low speed setting SYSTEM TEMPERATURE STATUS ========================= Intake Left temperature: 23 Celsius, Normal Intake Right temperature: 23 Celsius, Normal Exhaust Left temperature: 29 Celsius, Normal Exhaust Right temperature: 26 Celsius, Normal CPU temperature: 56 Celsius, Normal Power Supply Unit temperature: 40 Celsius, Normal REAL TIME CLOCK BATTERY STATUS ============================== Battery OK (checked at power up) SYSTEM POWER =============== Motherboard Components Power consumption = 71.5 W NM/SM slot 1 Power consumption = 10.1 W Total System Power consumption is: 81.6 W Environmental information last updated 00:00:02 ago My question is why does an 81.6W router need two 750W PSU external RPS? If at 12V max is 300W and -52V would be 400+W? Thanks,
... View more
Created by
ramonito.b.esca
in Routing
02-13-2012
02:04 AM
02-13-2012
02:04 AM
I don't think this is the answer for this post... I am having the same problem. router#show environment SYSTEM POWER SUPPLY STATUS ========================== Internal Power Supply Type: AC Internal Power Supply 12V Output Status: Normal External Redundant Power Supply is present, but not available due to supplying power to another system or insufficient power. SYSTEM FAN STATUS ================= Fan 1 OK, Low speed setting Fan 2 OK, Low speed setting Fan 3 OK, Low speed setting Fan 4 OK, Low speed setting SYSTEM TEMPERATURE STATUS ========================= Intake Left temperature: 23 Celsius, Normal Intake Right temperature: 25 Celsius, Normal Exhaust Left temperature: 28 Celsius, Normal Exhaust Right temperature: 27 Celsius, Normal CPU temperature: 55 Celsius, Normal Power Supply Unit temperature: 42 Celsius, Normal REAL TIME CLOCK BATTERY STATUS ============================== Battery OK (checked at power up) SYSTEM POWER =============== Motherboard Components Power consumption = 72.9 W NM/SM slot 1 Power consumption = 10.7 W Total System Power consumption is: 83.6 W Environmental information last updated 00:00:11 ago The router is only consuming 83.6W and still it seems the external RPS is not providing enough power? Thanks,
... View more
Created by
ramonito.b.esca
in Other Data Center Subjects
11-30-2011
04:36 AM
11-30-2011
04:36 AM
Hi All, We have resolved the issue regarding the above problem. We found out that the structured cabling was using SMF pigtails on the FO patch panels. That is why we are have the flap error disabled. We ended up removing the N5K and N2K and connect them with MMF patch cords. Now the N2K is working with the FEX. Thanks for the support here really appreciated. Regards, Ramon
... View more
Created by
ramonito.b.esca
in Unified Computing System Discussions
11-29-2011
02:47 AM
11-29-2011
02:47 AM
Thanks Anikas, Reseating the memory solved the issue. Thanks a lot.
... View more
Created by
ramonito.b.esca
in Unified Computing System Discussions
11-28-2011
07:10 PM
11-28-2011
07:10 PM
Hi Anikas, I have tried booting the server without the monitor and plug it after 10 mins, monitor just goes to sleep no detected video output. I have tried using the D15 connection at the back also, no progress also. I do hear three beeps after the fans spin down. Just to be clear the fans do spin 100% and spin down after almost a minute or so. On the front panel I only see green light on the power button, which indicate the whole system is up and running. I just dont see the video output which result in not having to configure the CIMC IP address. Thank you for your reply, Ramon
... View more
Created by
ramonito.b.esca
in Unified Computing System Discussions
11-28-2011
04:42 AM
11-28-2011
04:42 AM
Hi All, We have just bought a new Cisco UCS C210 M2 product for our CUCM migration to Virtual Machines. We have plugged an HP Monitor and a USB keyboard to start work with the UCS. Then we plugged the server to the power socket and power up the server, the fan was functioning properly for its initial blow. However I could not see the monitor going up and I can't see if it is booting properly. We waited and notice that the keyboard seems to be working as you can see the num lock and scroll lock works. I unplugged the monitor from the front console connection using the foxconn connector that came with it and plugged it at the DB15 port at the back. Same result the monitor doesn't output anything. So I moved on to the second UCS server using the same keyboard and mouse, everything is working. Have anyone experienced this problem of the monitor not working? If so please share how to fix it. Otherwise our conclusion would be that Cisco sent us a defective hardware or it became defective during transport. Thanks & Regards, Ramon
... View more
Labels:
Created by
ramonito.b.esca
in Other Data Center Subjects
11-27-2011
07:56 PM
11-27-2011
07:56 PM
Hi All, Using the N7K to install the Nexus 2000 yielded the same result as connecting to our N5K. switch(config-if)# sh fex 101 detail FEX: 101 Description: FEX0101 state: Image Download FEX version: 4.2(1)N1(1) [Switch version: 5.1(3)] FEX Interim version: 4.2(1)N1(0.002) Switch Interim version: 5.1(3) Module Sw Gen: 21 [Switch Sw Gen: 21] pinning-mode: static Max-links: 1 Fabric port for control traffic: Eth1/11 Fabric interface state: Po101 - Interface Up. State: Active Eth1/9 - Interface Up. State: Active Eth1/11 - Interface Up. State: Active Eth1/13 - Interface Up. State: Fabric Up Eth1/15 - Interface Down. State: Configured Fex Port State Fabric Port Primary Fabric Logs: 11/28/2011 06:27:09.662264: Requesting satellite to download image 11/28/2011 06:29:15.232681: Image preload failed. 11/28/2011 06:29:16.459514: Deleting route to FEX 11/28/2011 06:29:16.464452: Module disconnected 11/28/2011 06:29:16.465542: Module Offline 11/28/2011 06:29:16.502250: Deleting route to FEX 11/28/2011 06:29:16.507315: Module disconnected 11/28/2011 06:29:16.520566: Offlining Module 11/28/2011 06:30:27.820404: Module register received 11/28/2011 06:30:27.821854: Image Version Mismatch 11/28/2011 06:30:27.822322: Registration response sent 11/28/2011 06:30:27.822512: Requesting satellite to download image 11/28/2011 06:33:01.789172: Image preload failed. 11/28/2011 06:33:03.21324: Deleting route to FEX 11/28/2011 06:33:03.26651: Module disconnected 11/28/2011 06:33:03.27635: Module Offline 11/28/2011 06:33:03.60441: Deleting route to FEX 11/28/2011 06:33:03.64871: Module disconnected 11/28/2011 06:33:03.68626: Offlining Module 11/28/2011 06:34:14.640167: Module register received 11/28/2011 06:34:14.640895: Image Version Mismatch 11/28/2011 06:34:14.641367: Registration response sent 11/28/2011 06:34:14.641546: Requesting satellite to download image 11/28/2011 06:37:33.144396: Image preload failed. 11/28/2011 06:37:34.373433: Deleting route to FEX 11/28/2011 06:37:34.378391: Module disconnected 11/28/2011 06:37:34.379795: Module Offline 11/28/2011 06:37:34.429214: Deleting route to FEX 11/28/2011 06:37:34.433627: Module disconnected 11/28/2011 06:37:34.436989: Offlining Module 11/28/2011 06:38:45.746477: Module register received 11/28/2011 06:38:45.747175: Image Version Mismatch 11/28/2011 06:38:45.747841: Registration response sent 11/28/2011 06:38:45.748041: Requesting satellite to download image 11/28/2011 06:41:57.68356: Deleting route to FEX 11/28/2011 06:41:57.80615: Module disconnected 11/28/2011 06:41:57.83824: Module Offline 11/28/2011 06:41:57.98377: Deleting route to FEX 11/28/2011 06:41:57.102731: Module disconnected 11/28/2011 06:41:57.106928: Offlining Module 11/28/2011 06:41:57.151366: Deleting route to FEX 11/28/2011 06:41:57.155672: Module disconnected 11/28/2011 06:41:57.158411: Offlining Module 11/28/2011 06:43:08.457500: Module register received 11/28/2011 06:43:08.458280: Image Version Mismatch 11/28/2011 06:43:08.458874: Registration response sent 11/28/2011 06:43:08.459069: Requesting satellite to download image 11/28/2011 06:47:41.719070: Image preload failed. 11/28/2011 06:47:42.949044: Deleting route to FEX 11/28/2011 06:47:42.954394: Module disconnected 11/28/2011 06:47:42.955658: Module Offline 11/28/2011 06:47:42.973122: Deleting route to FEX 11/28/2011 06:47:42.978185: Module disconnected 11/28/2011 06:47:42.981593: Offlining Module 11/28/2011 06:47:43.26743: Deleting route to FEX 11/28/2011 06:47:43.31820: Module disconnected 11/28/2011 06:47:43.35748: Offlining Module 11/28/2011 06:48:48.755085: Deleting route to FEX 11/28/2011 06:48:48.760546: Module disconnected 11/28/2011 06:48:48.764950: Offlining Module 11/28/2011 06:48:54.260037: Module register received 11/28/2011 06:48:54.260794: Image Version Mismatch 11/28/2011 06:48:54.261268: Registration response sent 11/28/2011 06:48:54.261452: Requesting satellite to download image switch(config-if)# 2011 Nov 28 06:51:43 switch %FEX-2-NOHMS_ENV_FEX_OFFLINE: FEX-101 Off-line (Serial Number XXXXXXXXXXXX) It's very frustrating. Regards, Ramon
... View more
Created by
ramonito.b.esca
in Other Data Center Subjects
11-24-2011
07:30 AM
11-24-2011
07:30 AM
Hi All, I am still having the problem with the N5K and N2K. While waiting for TAC, I want to try to connect the N2K to our N7K distribution switch to ugrade the Fex OS to 5.x My question is if I connect the N2K to the N7K with version 5.1(3) will it have a problem if we connect it back to N5K with version 5.0(3) or will it be able to downgrade so we can use it in the N5K. Really appreciate if someone can confirm if this workaround will work. Thanks, Ramon
... View more
Created by
ramonito.b.esca
in Other Data Center Subjects
11-22-2011
09:39 PM
11-22-2011
09:39 PM
Dear Jerry, I tried to do install all command using the pre-installed NX-OS and it is still having the same issues. I also tried using the latest OS and still no difference. switch# sh fex 100 detail FEX: 100 Description: YYYYYYY state: Image Download FEX version: 4.2(1)N1(1) [Switch version: 5.0(3)N2(2a)] FEX Interim version: 4.2(1)N1(0.002) Switch Interim version: 5.0(3)N2(2a) Module Sw Gen: 21 [Switch Sw Gen: 21] post level: complete pinning-mode: static Max-links: 1 Fabric port for control traffic: Eth1/7 Fabric interface state: Po3 - Interface Up. State: Active Eth1/7 - Interface Up. State: Active Eth1/8 - Interface Up. State: Fabric Up Eth1/9 - Interface Up. State: Active Eth1/10 - Interface Down. State: Configured Fex Port State Fabric Port Logs: 11/23/2011 05:20:10.730999: Offlining Module 11/23/2011 05:21:23.942247: Module register received 11/23/2011 05:21:23.943004: Image Version Mismatch 11/23/2011 05:21:23.943130: Registration response sent 11/23/2011 05:21:23.943369: Requesting satellite to download image 11/23/2011 05:22:57.888743: Image preload failed. 11/23/2011 05:22:59.57922: Deleting route to FEX 11/23/2011 05:22:59.63714: Module disconnected 11/23/2011 05:22:59.64937: Module Offline 11/23/2011 05:22:59.84847: Deleting route to FEX 11/23/2011 05:22:59.89833: Module disconnected 11/23/2011 05:22:59.91197: Offlining Module 11/23/2011 05:22:59.134433: Deleting route to FEX 11/23/2011 05:22:59.139335: Module disconnected 11/23/2011 05:22:59.140721: Offlining Module 11/23/2011 05:24:43.341442: Module register received 11/23/2011 05:24:43.342252: Image Version Mismatch 11/23/2011 05:24:43.342384: Registration response sent 11/23/2011 05:24:43.342632: Requesting satellite to download image 11/23/2011 05:26:25.110749: Image preload failed. I guess I will contact TAC for this, too bad there is no work around. Thanks, Ramon
... View more
Created by
ramonito.b.esca
in Other Data Center Subjects
11-22-2011
08:03 PM
11-22-2011
08:03 PM
Hi Jerry, Thanks for the reply. Attached is the running-config for one of the N5K connected to 2 Fabric Extender with fex 100 and fex 101. We have the N5K running for over 24HR and still the fex doesn't come up. switch# sh int po3 fex-intf Fabric FEX Interface Interfaces --------------------------------------------------- Po3 switch# The problem is persistent, the N5K cannot upgrade the N2K's. Thanks & Regards, Ramon
... View more
Created by
ramonito.b.esca
in Other Data Center Subjects
11-22-2011
12:05 AM
11-22-2011
12:05 AM
Hi, We recently bought 2 N5K and 4 N2K Fabric extenders, now we are having problem installing the fabric extenders as the FEX just wont go up. switch(config-fex)# sh fex 100 detail FEX: 100 Description: ADM/128-SVF-NS302 state: Offline FEX version: 4.2(1)N1(1) [Switch version: 5.0(3)N2(1)] FEX Interim version: 4.2(1)N1(0.002) Switch Interim version: 5.0(3)N2(1) Module Sw Gen: 21 [Switch Sw Gen: 21] post level: complete pinning-mode: static Max-links: 1 Fabric port for control traffic: Fabric interface state: Po3 - Interface Down. State: Configured Eth1/7 - Interface Down. State: Configured Eth1/8 - Interface Down. State: Configured Eth1/9 - Interface Down. State: Configured Eth1/10 - Interface Down. State: Configured Fex Port State Fabric Port Logs: 11/22/2011 07:49:23.536463: Offlining Module 11/22/2011 07:49:23.564858: Deleting route to FEX 11/22/2011 07:49:23.572372: Module disconnected 11/22/2011 07:49:23.573795: Offlining Module 11/22/2011 07:50:34.741573: Module register received 11/22/2011 07:50:34.742363: Image Version Mismatch 11/22/2011 07:50:34.742496: Registration response sent 11/22/2011 07:50:34.742741: Requesting satellite to download image 11/22/2011 07:52:55.922414: Image preload failed. 11/22/2011 07:52:57.91269: Deleting route to FEX 11/22/2011 07:52:57.106904: Module disconnected 11/22/2011 07:52:57.108092: Module Offline 11/22/2011 07:52:57.110203: Deleting route to FEX 11/22/2011 07:52:57.115149: Module disconnected 11/22/2011 07:52:57.116546: Offlining Module 11/22/2011 07:52:57.150559: Deleting route to FEX 11/22/2011 07:52:57.155607: Module disconnected 11/22/2011 07:52:57.156970: Offlining Module 11/22/2011 07:52:57.189131: Deleting route to FEX 11/22/2011 07:52:57.193969: Module disconnected 11/22/2011 07:52:57.195342: Offlining Module 11/22/2011 07:52:57.234153: Deleting route to FEX 11/22/2011 07:52:57.239023: Module disconnected 11/22/2011 07:52:57.240432: Offlining Module 11/22/2011 07:54:40.815191: Module register received ADM_128-SVF-NS102(config-fex)# sh fex 101 detail FEX: 101 Description: ADM/128-SVF-NS304 state: Offline FEX version: 4.2(1)N1(1) [Switch version: 5.0(3)N2(1)] FEX Interim version: 4.2(1)N1(0.002) Switch Interim version: 5.0(3)N2(1) Module Sw Gen: 21 [Switch Sw Gen: 21] post level: complete pinning-mode: static Max-links: 1 Fabric port for control traffic: Fabric interface state: Po4 - Interface Down. State: Configured Eth1/11 - Interface Down. State: Configured Eth1/12 - Interface Down. State: Configured Eth1/13 - Interface Down. State: Configured Eth1/14 - Interface Down. State: Configured Fex Port State Fabric Port Logs: 11/22/2011 07:49:46.163035: Module disconnected 11/22/2011 07:49:46.164468: Offlining Module 11/22/2011 07:49:46.213737: Deleting route to FEX 11/22/2011 07:49:46.219043: Module disconnected 11/22/2011 07:49:46.220454: Offlining Module 11/22/2011 07:49:46.250091: Deleting route to FEX 11/22/2011 07:49:46.255026: Module disconnected 11/22/2011 07:49:46.256417: Offlining Module 11/22/2011 07:51:09.395617: Module register received 11/22/2011 07:51:09.396381: Image Version Mismatch 11/22/2011 07:51:09.396511: Registration response sent 11/22/2011 07:51:09.396756: Requesting satellite to download image 11/22/2011 07:55:08.409032: Image preload failed. 11/22/2011 07:55:09.671589: Deleting route to FEX 11/22/2011 07:55:09.682174: Module disconnected 11/22/2011 07:55:09.683181: Module Offline 11/22/2011 07:55:09.702525: Deleting route to FEX 11/22/2011 07:55:09.710557: Module disconnected 11/22/2011 07:55:09.711930: Offlining Module 11/22/2011 07:55:09.741583: Deleting route to FEX 11/22/2011 07:55:09.746544: Module disconnected 11/22/2011 07:55:09.747934: Offlining Module 11/22/2011 07:55:09.786138: Deleting route to FEX 11/22/2011 07:55:09.791026: Module disconnected 11/22/2011 07:55:09.792426: Offlining Module I am seeing "image mismatch" definitely because our N5K is pre-installed with 5.0(3) while fex is using 4.2(1) pre-installed. Is upgrading the N2K possible? Hope someone can help Thanks, Ramon
... View more
Labels:
Created by
ramonito.b.esca
in Other Wireless - Mobility Subjects
07-01-2011
03:17 AM
07-01-2011
03:17 AM
Antenna Diversity, is an antenna technique to use multiple antennas to improve quality and reliability of a wireless link. You dont equate SIMO, MISO, MIMO to antenna diversity. Those are type of antenna configuration that uses Antenna Diversity. A good explanation of Antenna Diversity can be read from Wikipedia, you can have different type of antenna schemes. Like you mentioned SIMO and MISO can be a Transmit/Receive Diversity (it doesn't mean it's Transmitter-Receiver Diversity), the SIMO and MISO you mentioned can also be using Spatial Diversity or Polarization Diversity (it really depends on the Antenna system your wireless equipment has). You antenna system can use different processing techniques to achieve diversity, such as switching, selecting, combining, dynamic control, etc. I am confident your question is more on the processing techniques of Antenna Diversity, read on there's a lot to learn... Bottom line is antenna system like SIMO, MISO, MIMO can use Antenna Diversity (SISO can't or I might be wrong, I am not sure)
... View more
Created by
ramonito.b.escarro
in IP Telephony and Phones
05-15-2012
05-15-2012
Hi Tere,I have made an upgrade to 8.5 from 2.3 and migrated my license.
I applied the patch for the ...
Created by
ramonito.b.escarro
in Unified Communications Infrastructure
05-15-2012
05-15-2012
Hi Rob,I just searched for this discussion because I have the same issue
with Daniel.I also upgraded...
Created by
ramonito.b.escarro
in IP Telephony and Phones
05-14-2012
05-14-2012
Hi Tere,Thanks for the reply it was helpful.By the way, I would also
like to check about licensing f...
Created by
ramonito.b.escarro
in IP Telephony and Phones
05-14-2012
05-14-2012
Hi All,I would like to get some help with regard to our latest updates
on the CUCM to 8.6.2.20000-2 ...
Created by
ramonito.b.escarro
in Routing
02-13-2012
02-13-2012
Hi,I plugged in two PSU with 750Wrouter#sh enviSYSTEM POWER SUPPLY
STATUS========================== ...
Created by
ramonito.b.escarro
in Routing
02-13-2012
02-13-2012
I don't think this is the answer for this post...I am having the same
problem.router#show environmen...
Created by
ramonito.b.escarro
in Other Data Center Subjects
11-30-2011
11-30-2011
Hi All,We have resolved the issue regarding the above problem. We found
out that the structured cabl...
Created by
ramonito.b.escarro
in Unified Computing System Discussions
11-29-2011
11-29-2011
Thanks Anikas,Reseating the memory solved the issue.Thanks a lot.
Created by
ramonito.b.escarro
in Unified Computing System Discussions
11-28-2011
11-28-2011
Hi Anikas,I have tried booting the server without the monitor and plug
it after 10 mins, monitor jus...
Created by
ramonito.b.escarro
in Unified Computing System Discussions
11-28-2011
11-28-2011
Hi All,We have just bought a new Cisco UCS C210 M2 product for our CUCM
migration to Virtual Machine...
Created by
ramonito.b.escarro
in Other Data Center Subjects
11-27-2011
11-27-2011
Hi All,Using the N7K to install the Nexus 2000 yielded the same result
as connecting to our N5K.swit...
Created by
ramonito.b.escarro
in Other Data Center Subjects
11-24-2011
11-24-2011
Hi All,I am still having the problem with the N5K and N2K. While waiting
for TAC, I want to try to c...
Created by
ramonito.b.escarro
in Other Data Center Subjects
11-22-2011
11-22-2011
Dear Jerry,I tried to do install all command using the pre-installed
NX-OS and it is still having th...
Created by
ramonito.b.escarro
in Other Data Center Subjects
11-22-2011
11-22-2011
Hi Jerry,Thanks for the reply.Attached is the running-config for one of
the N5K connected to 2 Fabri...
Public Statistics
| Date Registered | 07-01-2011 02:38 AM |
| Date Last Visited | 08-18-2017 03:55 AM |
| Total Messages Posted | 16 |
