Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I need to configure a switch to use two different models of APs wifi who connect to two different WLCs (because compatibility).I already have one model of AP who use the option 43 in switch DHCP pool to go the WLC.Now I need to use another mode...
Hello. I have two different switchs (WS-C2960X-48LPS-L and WS-C3560CX-8PC-S) and sometimes exist a user who connect his laptop by cable to this switchs. I already advertize to use our wifi_guest but his not care. So I ask, it's possible to configure ...
Hello, on my CUCM I have different models of voip phones (8865, 8811, 7821, 6921 and 3905). We recently detected that only the 3905 model displays a different time on its screen compared to the other models. The time displayed is one hour less than t...
Tenho um switch Cisco c2960x de 24 portas, mas neste momento só com acesso telnet por via CLI (Putty). Necessito que o switch tenha acesso ssh e gostaria de saber quais os comandos certos para fazer esta configuração, sem estar ligado por consola, ma...
Hi. In my company we have an IVR configured for automatic answering that redirects with keys to the corresponding internal telephone extensions. Some of these internal telephone extensions are redirected to private mobile numbers through our callmana...
Hello, thanks for your help Maren.A last question, is there any way to update the firmware of the 3905 all at once, or does it have to be done equipment by equipment?
Hello Maren, (thanks by the way for all help) the CUCM of my company is distributed in several locations in the country, so, we really have device pools but respect to locations e not by voip models. Everything leads me to believe that the problem ma...
Hello Maren, really I don't know where I configure the "Date Time Group for the 3905's Device Pool have a Phone NTP Reference". Im my CUCM I only have one group in System -> Date Time Group, and have correct Time Zone. All the 3905 have the same Phon...
Hello MHM right now I don't have access phisical to switch to do access by console. And can access by CLI. And yes I do your suggest. I'm really newbie in this configurations of switchs, but I'll learn.
Hello paul driver thanks for your help.Right now after do that sequence comands I not have acess by CLI with ssh or telnet. The access to the switch maybe only by console
