Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I had a client who is using CWS report that one of my domains is being blocked due to its inclusion in a malware database in CWS. Does anyone know of any way to request removal of a domain from the CWS block list? I called TAC and they stated that th...
Hello,Here is my current scenario:I have multiple sites connected via ASA site-to-site VPNs. I have a remote access VPN for end users that provides access to all subnets over the site-to-site VPNs (via hairpinning). The remote access VPN is a full tu...
HI everyone,How common is it to set up an entirely separate switching and routing infrastructure to handle voice over IP traffic? I'm curious if this would be necessary as opposed to just logically separating the traffic via a voice VLAN. Any input...
I ran a network scan on my Aironet 1130AG wireless access point and I discovered that udp port 27015 was open. Apparently this is a port that half-life uses for online gaming. I looked everywhere in the AP configuration and docs and I can't figure ...
I have an rj45-rj45 rollover cable connected to an rj45-db9f straight through adapter which is then connected to a db9 serial cable. I can't get a console connection to work in either PuTTY or Teraterm. The session begins but I just have a blank sc...
You hit the nail on the head -- thank you sir! The following commands fixed the issue:# policy-map global_policy# class inspection_default# inspect icmp
Huh, my adapter is supposed to be straight through. I used an extra db9 cable that came with a UPS I installed yesterday...might this be the cause? I have a sabrent DB9 to USB cable on order so the cabling I had hoped to work was: RJ45 rolled ->RJ...
I was able to get it working by switching out my rollover cable with a standard straight-through ethernet cable. I'm not quite sure why this works. I just recently obtained my CCNA and I was under the impression a rollover cable was required.