Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
It powers up fine, I can navigate to the webpages to configure it, upgraded it to the latest version of firmware (2.1.5). But there is no image displayed (under the 'home' link when I surf to the ip address.I have two brand new ones, both exhibit the...
Is there an option to turn on same interface routing?For example, web server A and B are on a subnet behind an ASA using private addressing. Web Server A resolve B's domain name to it's public address ( I realize a host file could be used here, but g...
I have the Anyconnect client successfully working in the sense that I am able to login successfully, the AnyConnect client shows that I have an IP address from the range that I have setup, but I am unable to ping, telnet, surf the web etc.Do I need t...
Found it:same-security-traffic To permit communication between interfaces with equal security levels, or to allow traffic to enter and exit the same interface, use the same-security-traffic command in global configuration mode. To disable the same-se...
tacacs-server timeout 30The above command solved my problem. It appears that there is a default of 5 seconds for the acs server to respond. The ldap query (and fail) was taking longer than the default 5 seconds. I up'ed the timeout to 30 seconds whic...
