Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Currently I have a wlc working perfectly with manamgnet via web login local and wireless users sent to the Radius server. This works fine but we need to take it a step farther and get our management users authenticating.
I see how I am able to chec...
I run bgp with 2 links to a provider and it's an MPLS link to them. I'm prepending routes to certain local subnets so subnet A will be preferred on link 1 and subnet B will be preferred on link 2. I use route maps and prepend our AS so that subnet ...
I have a 5585 and a problem going to a user on a zytel firewall. He says because im sending him too much in my SA (even though I've changed the policy he wants ie. aes 256 sha /28800 to the highest priority on the map so the ASA uses that one first....
can an access point with the model of lap1142n be converted to autonomous? I see notes in the forum leads me to believe you can but unsure as some model numbers list ap and some lwap- is this only a software dependency? thanks, George
Uhhuh. NMI received for unknown reason 2d.Do you have a strange power saving mode enabled?Dazed and confused, but trying to continue I replaced the power supplies and hooked up console but see this message on the box.. TAC didn't want to replace it ...
Hi Nagendra, local pref is only for how I route to the backbone.... I'm good there... where I'm asking and having the problem is having the backbone prefer route a on one link and route b on another. That is why im prepending but it looks like that ...
no , isn't there a way to set and enforce the isakmp policy? other firewalls can select only 1 thing like aes 256 sha, even the adsm leads you to believe you can pick the policy to enforce it but doesn't let you?? it's odd why would I want to let th...
I had to replace the box, it failed and the tac couldn't diagnose it. Since it's replacement I've never seen it happen again. Thanks and just putting this out there should anyone else run into it. G
I saw the interoperability portal only list a sip exampleI was suprized there wasn't a 323 example as well, or do you just change a setting and it's very much the same to 323??
