Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am playing around with 6.0.1 in the lab and I am not having any luck. I have it up and run but I can't get my 7970 to register. I can ping the phone from CCM and my DHCP option 150 is point to the CCM (dhcp for the phone is being hand out from th...
Do the FA0/0 and FA0/1 support auto-mdix. I am having issues at a site with a 2950 connecting directly 2811. I am not sure what kind of cable was used.
I was wondering why you can set your speed to a static entry and your duplex to auto or set your speed to auto and your duplex to static? This would be on IOS. I thought I recalled back on CatOS it would give you an error message if you tried to se...
Does the 2960 support tftp when it rommon mode? Can you set a 2960 to download it's image from a tftp server? If not is there any other way to get he bin file on the switch without waiting for xmodem?Thanks
Is there any reason why this command wouldn't work on a 3560 ip-base switch?C3560-24#test cable-diagnostics tdr interface fastEthernet 0/10% TDR test is not supported on interface Fa0/10Here is the config of the interface.interface FastEthernet0/10 s...
2 years later I found the answer... from the cisco books. The G will client will run at G speeds even if there is a B client.Now that the cell knows about the 802.11b clients and the protection mechanism has beeninvoked, the way that data is sent wi...
I have a Trace and a Tools drop down in "Cisco Unified Serviceability" but it doesn't have a Trace and Log Central. Is there somewhere I need to enable it?
2960Understanding TDRYou can use the Time Domain Reflector (TDR) feature to diagnose and resolve cabling problems. When running TDR, a local device sends a signal through a cable and compares the reflected signal to the initial signal.TDR is supporte...
What is odd is that does work on 10/100 ports. I though it was the different between SI and EI code but it doesn't seem to be. The switch it is working on is a 3560-8 and we also have a 2960 that it is working on.
