Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The only model available that can be configured as WGB is IW3702 .Can this be configured to use both radio interfaces.Example :Di 0 in station-role workgroup-bridge - mgmt ssid to associateDi1 in station-role root ap-only- user 8021x ssid- normally d...
Lost all IP-SLA collectors and historic reports during a change Have a weekly backup file from the server , how can we restore deleted IP SLA [128] collectors and reports if possible
After WLC upgrade to 8.0.100 [ not in HA mode], the AP seem to be dropping out and reconnect using the fallback to IP- inspite of the statically configured IP on the APRunning Outdoor mesh AIR-CAP1552E-N-K9 on WLC 5508(Cisco Controller) >show bootPr...
Intend to optimise traffic from two remote sites via one WAE and WCCP redirectionSite B connected over a Layer 3 link into Site A [ see diagram]WCCP over a Layer 3 WAN for traffic destined in and out of Site BWCCP details on the router ARedirect -...
Hi,Two queries:What happens when power fails on the ISRG2 router with WAAS running? Does the WAAS recovers on its own once the power is back up or it needs manual intervention?What happens to WCCP interception if the SRE module fails , does it use...
I am working on a similar problem Phase 2 S2S tunnel not coming up - the debugs suggest ACL mismatch. One end Cisco IOS FWL other end MX8x . Remote MX ( managed by third party) has multiple MX and couple of non-Meraki VPN peers working fine . This t...
I know this posting is few yrs old, wondering anyone can comment on a situation we had with a client VSS - 4500-X stack runningCisco IOS Software, IOS-XE Software, Catalyst 4500 L3 SwitchSoftware (cat4500e-UNIVERSALK9-M), Version 03.06.00.E RELEASE S...
this post could be redundant , but wondering if anyone had encountered a reporting problemLMS 4.0 - 300 device count- currently managing around 100 odd devicesConfigured 10 set of qos class IPSLA probes from each site to two responders[ 5 per respo...
We are trying to get a 2602e ap work as indoor mesh unit but AP is not joining WLC - the debug does not indicate a problem - shown belowany idea why?(Cisco Controller) >show ap join stats summary allBase Mac AP EthernetMac AP Name...
We downgraded the WLC to 7.4.121.0 and finally got rid of the DHCP problemBut encountered a new issueThe WGB once connected to the mesh AP does not reconnect to the network , auth failure- AIR-SAP1602E-Z-K9 running - ap1g2-k9w7-mx.152-2.JB2Local...
