Hi,I try to configure an etherchannel trunk but I´ve no success.So I need a step by step guide to configure the trunk.I´ve 6 vlans defined on the Switch:VLAN1VLAN121VLAN122VLAN123VLAN999Now I need an etherchannel as trunk (ports g7 and g19) with the ...
Hi,I need restricted access to another VLAN for TFTP traffic. So I´ve created an ACL like this:permit udp 192.168.30.0 0.0.0.255 host 192.168.40.10 eq tftpI add this ACL to the source interface (192.168.30.0) as INCOMING.The tftp request to the tftp ...
Hi,I´ve succesfully joined the ACS 5.1 Server to a Windows 2003 Domain. But no AD Groups are displayed in the selection box.Any suggestion?Thank You!GreetingsRouven
Hi,I try to discover our PIX 515E with LMS Device Discovery - without success. So how do I need to configure the PIX to be discovered by LMS?We use the PIX Software Version 6.3(4).Greetings,Rouven
After starting the device discovery I got some unreachable devices. These devices have a wrong, invalid IP-Adresse from a previous installation. So I cannot ping the device to find out the MAC address. How can I find out on which port of an already m...
Hi Ganesh,Windows 2003, on which the tftp server resides, use the range 1025 to 5000 as ephemeral ports. So I´ve decited to use the following acl:permit udp 192.168.30.0 0.0.0.255 host 192.168.40.10 range 1025 5000permit udp 192.168.30.0 0.0.0.255 ho...
Hello,thanks for your reply. But using TCP doesn´t solve the problem. The tftp server responds with a random udp port and this random udp port is not allowed by the incoming acl of the source VLAN.Greetings,Rouven
I´ve figured it out myself. I had to set "dot1x reauth-period server" in the radio interface. So the AP takes the value of the radius server.But now I´ve another question. We use two BR350 to connect to buildings. The authentication is also LEAP. On ...
