Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm trying to configure WLAN authorization with RADIUS (EAP-TTLS) on my Cisco Aironet 1600.At the datasheet (http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1600-series/data_sheet_c78-715702.html) it an information that this m...
Hello,I tried to fight with google's but can't resolve a problem.I've got Cisco swirch with IOS 15.0(2)SE4 and configured a few ports as Cisco Access Point smartports. AP's connected to that ports works only with that setting. Case is that I even can...
Hello,I've tried many solutions found in the Internet but still can't solve my problem.I've got a task to limit bandwidth per user up to 2Mb/s to avoid full utilisation of internet connection by one or two users.Can anybody write me (and for futures ...
I have a server on your LAN have IP 192.168.10.10 and put it upon the world by ip nat inside source static tcp 192.168.10.10 80 MyExternalIP 80 extendable Now, when I type my external IP address in the browser it appears website running on this serve...
On the first welcome on the forum I've got a little problem. Here I have two Cisco CP-7961G phones. When I try to turn them on they stop on "upgrading" if unplugged from the network. When I plug them into LAN network they gather an IP address fo less...
Hi John,Unfortunately I don't have any firewall or proxy. My network is tunneled to other network with central firawall and proxy over the Internet.BR,Pawel
Hi sandeepchoudhary21,I've tried this before but it limits bandwidth i.e. to 10MB/s for subnet. I've tried to make separate access list for every IP in subnet but router is not able to get so long config... BR
