About simonstoll

simonstoll · 07-23-2007

HiI need point-to-multipoint tunnels for a virtual overlay. Encryption is not necessary as the transport network is a corporate network and no internet. I also don't need the ability of direct spoke to spoke communication. At the moment I'm working w...

simonstoll · 05-07-2007

HiIs there a way to summarize E1 or E2 routes at a ABR? I cannot summarise this routes at the ASBR because the ASBR's are Dialin and VPN Endpoints which use the same B-Class Subnets therefor I would like to summarize this Network when it goes over to...

simonstoll · 03-20-2007

HiI'm a SSL Newby, and I'm stuck installing a Verisign SSL Certificate on the CSM-S SSL Offloading Card. I generated the RSA Key pair, the trustpoint, I enrolled the cert. via the terminal method, then I copy/pasted the cert. to verisgn and I got a s...

simonstoll · 02-06-2007

HiAnybody knows if Downloadable ACL's with the AS5350 and ACS work? I tried it with ACS 3.3 and IOS 12.3(11)T11, because i red that this feature should be supportet on IOS from 12.3(8)T on. But it doesn't work. When I debug the radius authorization, ...

simonstoll · 03-01-2006

HiI want to loadbalance two asterisk boxes with a CSM-S. I'm using Direct Server return (no nat server), and it works fine for any tcp based service, but not for UDP, such as SIP or RTP. Can anybody help me? Is this kind of configuration not possible...

simonstoll · 12-08-2023

Your workaround works like a charm, was stuck with this when setting up multiple tunnels from the same device over Ethernet based WAN Service plus a backup over 5G. I couldn't bring all tunnels up at the same time, only WAN or 5G, but never both at t...

simonstoll · 12-11-2014

Hi Alex,I saw your question while playing myself with Private-VLANs and OTV and the idea to combine it (just for LAB purpose :-) ) and having problem's to make it work (and found no answer here). The answer: it works, but not out of the box. The Prob...

simonstoll · 10-04-2010

Hi KrisWhether you can use the interface IP as NAT Pool I cannot answer you (never tried to do so, but I don't think it will work as you have different Interface IP's in a HA ACE Konfig on the active and passiv peer), but you can make a NAT Pool with...

simonstoll · 03-13-2008

"no ip igmp snooping" will disable igmp snooping (can also be done per VLAN), then multicast should be flooded again. But I don't think thats a good thing to do. It's better when your clients interessted in the multicast are able to signal that via I...

simonstoll · 03-12-2008

HiIt's not true that the switch floods multicast by default. It's only true if the there is a source and no receipient in the same vlan, then the traffic is flooded. As soon as a receipient register it's interest in the stream with IGMP, then the swi...

Member Since	‎08-08-2003 04:30 AM
Date Last Visited	‎12-11-2023 08:05 AM
Posts	82
Total Helpful Votes Received	36

User Statistics

User Activity

DMVPN without IPSec Encryption?

OSPF Type 5 summarisation at ABR

CSM-S with Verisign (Test) Certificate

Downloadable ACL with AS5350

Loadbalancing SIP and RTP

Re: NHRP Registration Failure(NHRP: no error)

Hi Alex,I saw your question

Re: ACE Loadbalancing to a rserver not directly connected

Re: IP Packet Multicast it is not work in my Switch

Re: IP Packet Multicast it is not work in my Switch