Hi,We encountered an issue with user name and user phone number displayed.Exemple:the extension 2000 is assigned to the user USER-Athe extension 1000 is assigned to the user USER-BI configure a call-forward 2000 (USER-A) --> 1000 (USER-B).If a USER-C...
Hi,I'd like to set Inter-Vlan Routing on my Cisco 881.Vlan 2: 192.168.0.0 /25Vlan 3 : 192.168.0.128 /26Vlan 4: 192.168.0.192 /26This is my running conf:interface FastEthernet0!interface FastEthernet1!interface FastEthernet2!interface FastEthernet3 sw...
Hi,I would like to apply rate limit on my WAN interface (upstream and downstream).I've found this configuration:rate-limit output bandwidth normal_burst excess_burstrate-limit input bandwidth normal_burst excess_burstI'd like to apply these limitatio...
Hi,I'd like to implement QoS feature on ADSL interface.So the upload and download value are different.How can i setup the bandwidth attribute, distinguish upload and download?Conf:Interface fastethernet 4 bandwidth 8000 service-policy output ...
Hi,I would like to replace my firewall by using ACL on my Cisco 881 for testing.Could it be possible?Configuration:access-list n° permit ip host distant_site_public_IP host my_public_IPaccess-list n° permit tcp any host my_public_IP eq portThis confi...
Our telephony service provider explain to us that the issue come from the internal memory of the phone.When we reset the phone to factory default settings, the name are displayed correctly since the next call forward.This is the only way we've found ...
Thanks for your answer.We are using 2 products in which we have the same issue:SPA-941Software version: 5.1.8Hardware version: 1.0.0(8830)SPA-942Software version: 6.1.5(a)Hardware version: 1.0.2 (180b) and 2.0.3 (7353)
I've tried with 3 different address:192.168.0.194 / 255.255.255.192 trying to ping 192.168.0.193192.168.0.130 / 255.255.255.192 trying to ping 192.168.0.129192.168.0.2 / 255.255.255.128 trying to ping 192.168.0.1I also disabled the PC firewall becaus...