I maybe over thinking this task, but what's the best way to implement call forwarding on a FXO based pots line? The gateway is MGCP controllered, I have Route Lists that contain the individual lines. I was hoping to have a route pattern like *771...
Support,Recently, I downloaded the MAC version of CNA. When I unzipped, and executed I receive a pop-up that says it's corrupted. I have redownloaded and try older versions, but still no luck. Am I missing a step to run under MAC OS? John
I have a basic Auto Attentant configured, and when inbound caller selects an option; say 1, they get a "wait while I transfer your call" and then the hold music. This last for 15 seconds or so; then call gets transferred to the correct DN.Looking f...
I am using a SG200 to expand a small office area. It will run to computers and Cisco 7960 IP phones. I have attached a simple topology diagram for reference.The 2960 port configuration is as follows:interface GigabitEthernet1/0/14 description Sq...
I am trying to leverage a couple of SG200 for a small office area. It will be downstream from a 2960 layer 2 switch, connected to a trunk enabled port on the 2960. The topology looks like this:/PC DESKTOP/====/IPPHONE (7962)/======/SG200/======/...
So here is where I am at.. I have all the routing working now. But my telco provides what they call a reminder ring; which seems to be causing the CUCM to seize the line and the call forward turns into a conference call.Is there anyway to suppress ...
Charles,That's what I am attempting to do. I guess I just not 100% on how to accomplish sending the digit string once the line is selected.I need to experiment a little more. John
It's integrated to CUCM via SCCP. The AA are configured to "release to switch".This only happens for called that go through Unity. Calls between handset are fine.Not sure what to look for in the route plan. The calls come into the CUCM and rout...