Hi all,
Currently the majority of our larger sites are outfitted with two 2921 ISRs running HSRP, and a Layer 3 core switch that does a 10.0.0.0/8 route out to the VIP of the routers (and a default route to ASA). These routers each have a single MPLS...
Hi all,
First post here, so excuse me if I post in the wrong section.
Last night at work we performed some switch swaps in two of our buildings. Prior to the service windows, each building had an Avaya switch (4548 in one building, and a 5698 in the...
Yes, we're using an Amcrest FOE5912 for each of our ATAs. They're pretty great. We actually started buying these in bulk for ATA deployments specifically, but have started using them in a myriad of (non-critical) applications just because of how conv...
Where do you live? I'm buying you a drink :)Funny thing is, my parents use an old Linksys SPA9000 for their home intercom, and it uses the exact same URL to reboot. Never occurred to me to try it here considering how similar the interfaces are.We hav...
I realize this thread is very old, but for anyone else still struggling with this: we simply installed some cheap POE splitters at each location. That way the ATA receives its power from the switch and we can simply bounce the switchport to get it to...
I've attached the config of each test router. Keep in mind that because I'm testing with DMVPN, the MPLS interface is technically Gi0/0. If I shut this interface, the tunnel drops and BGP clears after a short period as expected. But if the link stays...
