Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Looking for instructions on how to configure Wireshark to capture wireless traffic from a liteweight AP thats configured in Sniffer mode. The controller/AP configuration is easy enough, but looking for specifics on Wireshark config. Controller config...
Are there any performance benefits to enabling HREAP (local switching) when there is a local controller present? I am aware of the benefits of users staying authenticated when the remote RADIUS server is unavailable.I assume that when doing so, the A...
I have a Intermec 2455 (truck mounted bar code scanner) that shows associated on the access point, counters on recieve/transmit statistics are increasing.I am unable to ping the device from a wireless client, the access point its associated to, or a ...
Im receiving a duplicate ip address fault from WLSE loopback address of 127.0.0.1. Is this possible? The fault description says "Duplicate ip address detected. Please check the Duplicate IP folder in the Device tree." I do not see any Duplicate ip fo...
I have recently discoverd that some changes applied via a browser interface are not applied to the startup configuration. I confirm this by starting a telnet session to the device and entering show start. This appears to be inconsistant in that somet...
Update - Discoverd that when I telnet to a device and try to copy running configuration to startup configuration, I recive the following error message.apmp12001e#copy run startDestination filename [startup-config]?Building configuration...Error writi...
We use Cisco 350 series WorkGroup Bridges and use a cross over cable to connect to HP Jet Direct devices. I believe the 350 series WGB's are end of life though.
Thank you for your help. This is interesting and it leads to more questions. The majority of of my wireless clients in this area are 350 series work group bridges. We use these for printers and attach a single HP jet direct box behind each WGB. The J...
