Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there a way to exclude certain device types from config archival? For example, our Call Managers obviously can't have configs stored in Ciscoworks so I'm trying to find a way to exclude them (along with a few other unsupported device types).I've ...
I'm trying to setup some kind of notification to occur when a downstream switch loses connectivity and would really appreciate any advise on the matter.Here's a very rough diagram of my current setup:core-6500 ------ CiscoWorks | |-- distribution-3...
I'm trying to setup some kind of notification to occur when a downstream switch loses connectivity and would really appreciate any advise on the matter.Here's a very rough diagram of my current setup:core-6500 | |-- distribution-3550 | ...
I'm beginning to suspect that our Call Managers should be rebooted once every couple months or so, based on some observations of how the servers perform. After a couple months or so their performance seems to suffer in subtle ways. I mean, I've hea...
I understand that CiscoWorks2000 does not support non-cisco devices, never the less I would like to try and monitor such devices through CiscoWorks. Specifically I would like to monitor our snmp-enabled UPSs and I'm wondering if it's possible to con...
From my perspective what you're describing sounds like a bug in Common Services; whether your hardware is supported or not in DFM ought to be documented somewhere, likely in the DFM page. I believe the behaviour you're seeing is somehow tied to DCR,...
Ciscoworks keeps track of device model-types by their OID number, which you can see when you manually select the device type under Device Management. In your case an incorrect OID number is being assigned which then leads to incorrect snmp values wh...
The device in question is running IOS MSFC2 software from the 12.1 release train. Below I've included the possible snmp options available at the configuration console.###(config)#snmp ? chassis-id String to uniquely identify this chassis co...
In my previous example neither the core nor distribution switches support this command; some experimentation didn't reveal a similar command. Is it possible that this command is only made available after a certain IOS release?
