Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I have configured Policy Based Site-to-Site VPN from from local network and outside (ISP1) interface to remote network, and it's working. I have configured Access COntrol and NAT policy, everything is working fine, but..
When ISP1 is down t...
Hi
for several weeks, 6825 headphones operating with DBS-210 (multicell) bases periodically send some codes, it happens when turning on the handset or changing the base.Calls on the exchange are visible as incoming from the number configured in the h...
Hi,i have CUE on ISR 4k but after transfer calto csccp phone i can't hear ringback tone, after transfer to SIp phone it's ok. i tried with: CUE:ccn subsystem sip
transfer-mode blind referCME:voice service voip no supplementary-service sip moved-temp...
Hi all,i just saw problem with increasing total output drops on interfaces at cat 2960s (WS-C2960S-48LPD-L ver. 12.2(55)SE8)problem is on every connected interfaces, some with ip phones others with PCs and uplink interface, everywhere total output dr...
Hi all,
thanks for questions and your time.I tested it in the virtual environment and everything is working fine, when sla is down traffic is switched to ISP2 and tunnel works fine, so problem is not at configuration FDM but on remote side
For firepower remote site is configured as static (remote network has one ip address behind BGP)remote site is configured as dynamic to allow tunnels from more then 1 ip
quick scheme:
on dect screen looks like incoming but on PBX also as incoming:
SIp log from PBX
Received:
INVITE sip:20671273@10.10.10.1;user=phone SIP/2.0Via: SIP/2.0/udp 10.10.10.32:5060;branch=z9hG4bK2e3swjk.hbbarbn61.q5w98p0opMax-Forwards: 70From: "Sales"...
