Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We recently upgraded our ASA to 8.3, most everything went ok, but I am having problems with outgoing nat. It seems that when one our systems that needs to be natted to an outside IP address when connecting out is not doing it. When that system goes o...
I am trying to upgrade an NM-CUE module from 2.1 to really anything else, I started by trying to upgrade to 8.5, 7.1 and finally 3.2. The compatibility matrix states it should work with all three. Every time I attempt to upgrade it I get the followin...
I am trying to access three ip addresses on a remote site. The first is a service engine ip address that connects a Unity AIM module, the second is the Unity Ip address and the third is a loop back address. The remote site connects to our main site v...
Hi,I am having problems accessing our internal network via VPN. We have an ASA at the perimeter that connects to a 3745 router and all of our networks come of that router. I can establish a VPN connection to the ASA but I can’t ping any of our intern...
Hi, I am trying to set up the locale on cme 8.5 to japan. I am using ip phones 7942. I have changed the user and network locale via the telephony service and set them up for JP, I also downloaded and extracted this file CME-locale-ja_JP-Japanese-7....
Unfortunelty that did not work. Although, that config is what I thought would work too. I did remove the 1 to 1 nat too. 1 (INSIDE) to (OUTSIDE) source static obj-10.200.0.10 obj-OUTSIDEIP translate_hits = 1, untranslate_hits = 361 (INSIDE) to (OU...
Thanks for your reply!I have advanced this issue a bit more. The problem is definetly nat. Our SIP provider states that we can not connect because the ip address that they are expecting is incorrect. Instead of coming out the static natted address th...
