Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Could you please let me know how is 3850 performance for MPLS. I am planning to deploy 3850 stack switches in our network as P. But would like to know if you see any performance issue. ThanksSaurav
Hi All,i am stuck into a problem with multicast issue. we have a router that connects to carrier router.Carrier router can see that multicast gorups but we can not see. carrier router is X-connect to our router.In our router i can see igmp request fo...
Hi,I configured one vlan and trying to authenticate it through radius server.My objective is when a internal users want to connect through this SSID they just put username and password and authenticate through Radius server. Another vlan is getting a...
Hi All,i am very new to voice and we are migrating from cisco ip phoen to mitel phones.So at the moment voice gateway router is having cisco unity express installed in it.My question is that if i shut down service engine interface then servcie engine...
Hi,Can any one please explain what is the difference between shape average and shape peak in QOS.From my understanding shape average is CIR and shape peak is max BW of link.so is it possible if link bandwith is 64K then we can allocate shape average ...
Hi Leo,Company already bought this switch and I have already advised them limitation of this switch. For time being they want to go ahead with this switch. So, at this point of time I have to go what we have. My plan is to use as P only rather than P...
Hi Balaji, I have opened a new thread https://community.cisco.com/t5/mpls/mpls-on-cisco-3850/m-p/4574578#M23767 Below is HLD. Purpose of cisco stack switches is use as P only and provide more ports to patch Mikrotik device. We are small ISP.
Hi Balaji,Thanks for reply. When I say performance more related to forwarding the packets. We are going to use as stack switches (total 48 ports) and terminate Mikrotik PE's on this. So, just wondering we should not see any load issue or forwardin...
