Dean,There's no option to change the background settings when the CTS endpoints aren't in a call. There is an option in 1.8 to remove the watermark however this does require a license.Regards,JD King
Saurabh,The TX Software are for the Lago Codecs. The software still gets downloaded as CTS firmware in COP file format. One the primary codec downloads the firmware from the CUCM you will see the TX tag. I will provide a link to get to the TX featur...
Ahmed,This is a good place to start.http://www.cisco.com/en/US/partner/docs/telepresence/cts_admin/cts_documentation_roadmap/CTSdoc_rd_map.html.This link has all documentation for TelePresence. The CTS enpoints usese the CUCM for configuration, regi...
Nikhil,The only thing that you should be aware of on the 2 codecs are they GEN 1 or GEN 2. On the GEN 1 all the microphones connect to the primary codec. On the Gen 2 the microphones connect through the audion expansion box. You can see the differen...
Alberto,When you put the phone load name in see belowCTS: Phone Load Name> CTS.1-8-3-4R-K9.P1IP Phone: Phone Load Name> SIP75.9-3-1-1Also don't forget to load the .jar and .jad file for your midlets on your tftp server. Also set up a phone service f...
