We are beginning to deploy VMware ESX servers for Windows production environments. How do I set up the VNICs to dual home the VM's to separate Catalyst 6500's.Thanks, Lisa
Some of our computers currently have Intel Pro/100 NICs and are consistently getting link up/down connections to our 2948 switch. Does anyone know what may be causing this?
The paging system will generally have separate analog ports for the separate zones it supports (if you have multiple zones), and one port for all zones.You will assign extensions to each port and the end users will need to know what extension to dial...
Becuase EAP-TLS doesnt have username or password but contians only with certificates it will not work. PEAP has an option for using username and passwords.
KIndly ensure that the following things are in place,The client and cache engine must be on the same interface of the Adaptive Security Appliance (ASA).ASA uses Generic Routing Encapsulation (GRE) based on Web Cache Communications Protocol (WCCP) ver...
The SL-Series Card is a four-port, 1.0625- or 2.125-Gbps Fibre Channel/FICON card.So the bandwidth can be increased upto 2.125 Gbps.Refer URL http://www.cisco.com/en/US/products/hw/modules/ps2710/products_data_sheet09186a00801b97a7.html
