About fruition3000

fruition3000 · 06-04-2012

Is it possible to have an ISR authenticate with a secure NTP server and then relay that time by acting as a Stratum 1 NTP server?

fruition3000 · 05-17-2012

Where is this field in the BAT tool so I can link up these users in Unity Connection?Directory Number AssociationsThanks!

fruition3000 · 04-26-2012

Hello all,Here is the scenario and my questionVoIP deployment 100 phones, PC's, two ISR's and a switch. I would like to setup a DHCP server for the phones on the ISR and have a DHCP helper for the PC's. I wanted to setup an environment where there i...

fruition3000 · 10-20-2011

Hello all,Does this module do everything an ASA can do? A client of mine was wondering what the better option was.3925 + NME-IPS-K9 or 5540?I have not been able to find enough information to clearly see the technical differences.

fruition3000 · 12-14-2009

It is my understanding that NBAR is able to classify certain packets based on certain descriptors in the packet. It is also my understanding that the FTP client and server negotiate different port numbers once the session is initiated. I have enab...

fruition3000 · 06-04-2012

Ok the stratum issue is fine. So are there any commands needed to activate the router's NTP service? Usually I would do NTP server x.x.x.x for an external source and NTP master if I wanted the router to act as an NTP server. I wasn't sure if one m...

fruition3000 · 05-21-2012

I had a chance to test out different options. For a new build when using the BAT tool to import users and phones. The primary extension needs to include the Route Partition along with the extension. "5557777 in Internal" So looks like it was an er...

fruition3000 · 05-17-2012

I could be mistaken but this option looks like it is only ment to export.

fruition3000 · 05-17-2012

I have not configured unity just yet. I wanted to populate this field using the BAT tool for uploading users for CUCM.

fruition3000 · 04-30-2012

I wouldnt be using HSRP I would be using GLBP to take advantage of load balancing. Have any of you tried the configuration I am proposing?

Member Since	‎12-04-2009 02:02 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	22

User Statistics

User Activity

NTP Client and Server - Same router?

Directory Number Associations - BAT Tool

GLBP - Router DHCP Server

NME-IPS-K9 VS ASA

NBAR classifying FTP traffic as unknown

NTP Client and Server - Same router?

Directory Number Associations - BAT Tool

Directory Number Associations - BAT Tool

Directory Number Associations - BAT Tool

GLBP - Router DHCP Server