Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
SpoilerDear Community Team ,Hope you all are doing well ,This time i am facing a problem with FAX and the scnario as following :Fax machine (HP all in one) to--- analog port of ATA 190 --SIP-- CUCM----SIP----CUBE----SIP----ITSP.I have configured th...
Dear Community members ,
Hope you all are doing great in your life and professional jobs .
I am having an issue with the Call manager version 10.5 and 3rd party GSM Gateway (Sip trunk).
We have an extension 6876 that suppose to call to outside netw...
Dear Cisco Community ,
Wish you all are fine .
I have cisco 2504 with 50 License and cisco AIR-AP1832I-E-K9 (25) .
Every thing seems to be configured propoerly .
But all the APs are not joining the Controller .
Here is the logs from the WLC , and c...
Hi all dear comunity memebers ,
I have an issue which couldn't find soluation for .
We have an IPTV server & TVs with Cisco 4507R & 2960X switches .
The IPTV Vlan is Vlan 3.
All configuration we have done seems to be correct and all are on the same V...
Dear Community Team ,
Greetings ,
I would like to get help in CME 11.5 I have 2921 CME 11.5 and SIP phones 7821 , 8945 .
I have done all required configuration however both types doesn't get registered .
The message from 7821 is Reg send Failure :R...
I wanted to clarify this , That GSM gateway is having a sim cards (for PSTN side ) and the other side is VOIP through the switch to the CUCM side .As i see in the GSM document , that it supports g.711 ,g.729 etc so i don't think that i need transcod...
Thanks again Slavik for your valuable input .I guess it will be something related to VOIP card routing the RTP to / from CUCM .Below link is from the vendor side of GSM Gateway (which is in my same LAN "both CPU & VOIP " and ping-able ).https://wiki....
Dear Slavik ,Thanks for your reply .Well , in the 3rd party gateway we have 2 ip address as following :- The Gateway CPU IP address (responsible to establish the call as i understood from the datasheet (SIP signaling )- The Voip Card on the same unit...
