I have two data centers interconnected through a MPLS backbone running MP-BGP (typical L3 VPN setup with two sites).
If rz1n1-dc redistributes its locally configured static default route into OSPF, the following happens:- one type 5 LSA for 0.0.0.0 i...
Hi,I have a problem with my corporate mobile phones which are configured as remote destinations.- Phone A calls Phone B (both internal)- A PSTN phone calls phone A and hears a busy tone --> everything good so far- If instead of a random PSTN phone ...
Hi,I have a CUMA setup in combination with iPhones and Cisco Mobile client.There are some users which only have a CUMC device in CUCM (with an associated Mobile Identity). They don't have a deskphone/softphone.Now, for some users that works fine. But...
Hi,I have two CUPS 8 / CUPC 8 installations. They are both completely independent of eachother (belonging to different customers).Both customers use the same CUPC client which is v8.0.171.15962 and CSF version is 8.1(4)-3.14.4,and both customers use ...
Hi everybody,I have a problem with mobile connect calls:- External PSTN user calls one of my mobility-enabled DID numbers (418302001), but doesn't send calling party number (CLIR)Channel ID i = 0xA98382 Exclusive, Channel 2Calling Part...
Hi Erik,I agree with Rob, thanks a lot for posting back the answer to this question.That helped me a lot and saved me a time consuming TAC case (I have the exact same situation/problem).@Cisco CUCM Development: Are you guys serious...? I mean, come o...
Hi Sriram,seems that others have had the same issue in the past. I received not only the answer I already posted above but also another suggestion.If you put the H.323 gateway in a device pool with a MRGL that does not have an annunciator, it works.I...
A colleague seemed to have the same problem (though only with iPhones, I have it with all mobile phones)His solutions was to add the commands "voice call convert-discpi-to-prog" and "voice call discpi-off" on the gatewayThat means that all callers (w...
Hi,thanks a lot, "the same phone mode" was the keyword! I tested this again with both phone modes and the result is:- if the callee is in softphone mode, there is an option "transfer to remote destination"- if the callee is in deskphone mode, there i...