Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,We have a project of connecting 2 Siemens Hi-Path PBX and we would like to use Cube to create a Sip trunk between our two location.I found a document on cisco website with a design (please see attachment), and I'm wondering if the use of 1 Voi...
Hi,I have a strange problem with one phone in our company.We're running CME v8 on 2921 router and have a couple of 8961 phones.When I go to "Applications" and select "Call History", I'm able to see call history on all the phone except one(it shows no...
Hi All,I have an issue with a CME 7.0 on a 2821 platform. This customer is currently using E1 PRI to dial outside but he would like to try Sip call from local provider. So I did the configuration of the SIP Trunk. My gateway is registered and incomin...
Hi all,We upgraded our CUPS 7.0(5) to 8.0(2) and our client from CUPC 7 to 8.Everything is working fine but I noticed something very strange.When placing call in softphone mode from CUPC 8 to an other phone, the call is placed and connection establis...
Hi all,One of our customer is using Mobile Voice Access (MVA) and would like to record the call made from the mobile phone through his main office.The user is corretly set in CUCM with a primary extension. A Remote Destination Profile is associated a...
Hi,Already had one issue during a restore which stuck.I opened a Case and the guy asked me to change my SFTP server.I told him I used it for 6 years and never had any issue.He told me to use FreeFTPd server... He was right.Restore worked after that.Y...
Nope, no document.What we did was to remove one by one all equipment connected to the Lan.When we removed the asa, phones were working.So we put back the Asa on the Lan and decided to look which asa feature was the source issue.And it was proxy arp.F...
Thank you Alex, that did the trick.Waiting for next firmware to correct that now No prob rob, I appreciate it. Just notice that it could not resolve my issue, but good to know.ThxFabian
