Dear
I have Cucm server with around 25 Wired Ip phone and all working Fine,Yesterday i bought Wireless IP Phone 7921 to add to my network and i faced problem in registering the Phone.
1) The Wireless AP is open mode (Security disabled).
2)DHCP on ...
hello
i have ASA5510 with https enabled ,i can ping from my PC but when i try to access the GUI it gives me this error:
This page can’t be displayed
Turn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced settings and try connecting to https://192.168...
Dear
I have a Voice Lab and i have faced this problem:
This is my topology:
1)CUCM 11 installed in a server
2)Jabber Client installation in a Client PC
3)ping from Client PC to Server is OK.
4)I have 4 IP phones and one CCIP Cisco SoftIP phones ...
Dear
our company has two department (same location),i need to install IP Telephone in these two differents .each department has VLAN and i want to use Different voice VLAN for each department.
i have CME installated in our main router.how i can ma...
Dears
i have two routers 2800 series and i would like to create Site to Site (LAN to LAN) VOIP using VNP/IPSEC tunnel between these two routers ,these routers are connected to the internet.
is it possible to build L2L VPN with both sides having D...
Dear
Thanks for your reply.
the DHCP option 150 is enabled on the CUCM.
the 7921 has DHCP enabled and the alternative TFTP address set to the TFTP address of option 150 (same as the CUCM),i will update the Firmware and Check again
Dear
Sorry for not sharing the outpout as the first problem solved when i activated the 3DES-AES license
now i am send all these outpout and i hope you can support me in ordered to find the problem:
1-the Txt file is the running configuration file...
guys
i really can't understand this problem,i spend 2 days without any hope.i create key and trusted and enroll it with self-signed and i export this key to my windows operating system (added to the certification root folder ),when i access the appl...
Dear
3DES-AES installed and active,now when i try to log in from browser it shows "401 unauthorized" certification untrusted,i createded key and trusted and then exported to my local machine and it still says the certification is untrusted.
i checked...