Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We are running CUCM ver 7.1.5.10000-12 with 7940,7941,7961 and 7962's deployed at mutliple locations. There have been at least 5 different phones at different locations that will auto dial the last missed call as soon as the handset is picked ...
I upgraded our 5520 to 8.3(1) last week and also upgraded the memory. If I do a "show memory" on the ASA, it reports the following:lsfw01# sho memory Free memory: 2313296496 bytes (108%)Used memory: 4129154448 bytes (192%)------------- ...
Hello,I know there is a required 2GB memory upgrade to go to 8.3. Is it possible to do the upgrade in the following order, to minimize downtime?1 - install 8.3.1 2 - shutdown the ASA 3 - install memory upgrade 4 - power ASA on to complete the upgrad...
We have a MPLS network with Site A having a 45MB connection, Site B a 3MB connection, Site C a 1.544MB connection to the cloud. (Along with multiple other locations) All sites can talk to each other. If a person from Site A visits site B and wants...
Hello,I upgrade our CM servers to version 7.0(2) about 6 weeks ago. I had Cisco issue me 2 temp Node licenses. I have received my permanent license and uploaded it. How do I verify that CM is actually using the permanent license that I uploaded an...
I ran into this today. I followed your document but I could not login with the username and password created in step 2. I found another document that had two potential default passwords for the CIMC login. I used 'password' to login to the CIMC. ...
Nice video. What version of Prime are you running? I'm running 2.2.1 and do not have the Converged Access option under the Services tab. Is there a specific version that I need to be on?*Edit, just found that I need to download the TechPack 2.2.1 ...
Do you have QoS configured? I know when I had this issue at a different location with another 1861, TAC had me add the 'fair-queue' to the policy-map.policy-map VOIPclass VOICE priority 256 set dscp efclass Signaling priority 64class class-de...
Hi Rob,The user is just picking up the handset to dial a number. They are not looking at the missed call list. It has happened on a 7941, 7961 and a 7962. It has happened to phones that are setup with a device profile and phones that are not using...
