Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day,
I'm trying to create a scripts to create configuration files for 500 switches consisting of C2960, C3850 & C3560 models. I have created 3 templates text files with for each model and an excel spreadsheet or MS Access DB containing specifi...
Hi,Can anyone please help with the following:1. a firewall configuration that would allow me ping both the inside & outside interfaces of the ASA 5505 firewall from PC1 and PC2 as shown in the attachment. I have tried to configure this several time b...
Hi all,Is it possible to use Polycom (Soundpoint IP 330 SIP) IP Phones with the UC520? If it is possible, are there any problems to watch out for?Thanks in advance for your prompt response and advice.RegardsTola
I have a Cisco 7204VXR Router running c7200p-ipbasek9-mz.124-4.XD5.bin IOS. However, the router only uses the extended source ports (21645 to 21844) for RADIUS authentication despite using the command "no radius-server source-ports extended"and reloa...
Hi Ben,Thank you for taking the time to reply and offer suggestions. This is exactly I'm trying to achieve but I have very limited scripting experience. Although I'd try out the Zero-Touch SmartInstall suggested Leo Laohoo, I would also spend sometim...
Hi MiKa,Quick update in the ASA:1. PC1 can ping inside interface and PC22. PC1 cannot ping outside interface3. PC2 can ping outside interface and PC12. PC1 cannot ping inside interfaceConfiguration file sent earlier is still running Sent from Cisco T...
Hi MiKa,1. I've solved the router problem by clearing the ARP tables on all the devices.....thanks for your advise.2. Still have following problems with the ASA - PC1 can pint inside interface but cannot ping outside interface or PC2 - PC2 cannot pin...
Hi Mika,Thanks so much for your prompt response and your suggestions. It's almost midnight at my current location so I may not have all the info you required but see my response below:1. Firewall config is attached (mannually edited to remove sensiti...
