Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Weird issue.AP 1832i----switch(no trunk)-----DMVPN--WAN--DMVPN--WLC5520 8.5.151.0Sometimes PSK Auth process fails with message "wrong PSK" on Device. Sometimes it works. Seems like there are "timeslots", when it works - and when it does not work.Seem...
Hello,some maybe "unusual" question..WLC 5508 in Datacenter.Goal:In small Branchoffices, only run a Cisco AP 1815m or 2802i as OEAP (only management / 802.1X auth via capwap), but the authenticated usershould have local access.So1. the AP is connecte...
Hi ..configured CIMC Port on WLC 5520.set admin password on cli(WLC5520) >imm username admin password test123 test123(WLC5520) >imm summaryThis will take some time...Please be patient!User ID.......................................... adminDHCP..........
Himigrated today many APs to some new WLC 5520 with 8.5.151.0.All these APs did run on a 5508 with same firmware.ONLY this model 1815m wont join.No AP autorization list, no fw blocking ports, ap licenses ok, system time is OK per NTP.Maybe the 5520 n...
Helloi simply wanna make WLC 5508 to send SNMP Traps to some free SNMP Trap Receiver, when an Access Point goes down, as Wireless Control Server is outdated and i need a simply solution to be informed when Access Point is not reachable.Installed some...
Seigh. Why the heck do i need HOURS just to find out how to backup cisco switch config via scp to some scp server?Annoying.I have Azure Blob Storage listening on tcp22 SSH.I have a User in Azure with the permission on the blob storage.How is the SYNT...
Hi ..What about this scenario1. AP connected in branch office to ISP Router, gets IP from ISP Router2. OEAP Capwap connection to WLC in Datacenter via Internet3. User authenticates via 802.1X to some SSID successfully4. User has local breakout in the...
HI ..Looking for a solution, how to authenticate Azure AD Users for 802.1X WIFI.We use ISE too. ISE can not "join" Azure AD?Whats the best practice to authenticate Azure AD Users via ISE for WIFI (without captive portal..)Thank you!!!
Simple Reason (ARGGGAAAAHH!!!) Not only the AP need to access WLC, but also WLC must initiate Traffic towards Access Points.So Firewall Policies in the path blocked some traffic from WLC to Access Points.
