Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi,i have enabled the H-REAP centeral auth and centeral switching to connect my LAP cisco accesspoint to wireless controller via Layer 3 connection.i need to know what type of default security tunnel running between LAP and WLC to encrypt the Data/m...
hi,I am using 3750 stack switch of 4 where we are facing a issue with the CPU utilization. the utilization is going high to 50 - 70 %.when i use the command "sh processes cpu history sor" the cpu utilization for hrpc<- response is more.please let me...
Hi,there is no log generating for TACACS+ Administration in ACS. ACS Version: 4.1.1.23Router Config:aaa authentication login default group tacacs+ localaaa authentication login no_tacacs local enableaaa authentication enable default group tacacs+ ena...
hi,we have migrated our network to cisco standard with 2 6500*Core layer and 2*6500 Campus layer and 2 * 6500 Datacenter layer with IOS version 12.2(18)SXF15a.we are facing a slowness on the new network where there is no packet drop so could you plea...
thanks for the reply,we are using the WISM module (WS-SVC-WISM-1-K9) and version us 6.0.199.4 so please let me know if this will support DATA encryption and mgmt encryption, if yes kindly let me know what type of encryption is this,
hi raj,you can find the total cpu utilization is going around 59%. for five seconds.we are facing a problem that there is an delay in getting the snmp informaiton means its taking around 10 min if we need an snmp Uptime information from the switchthi...
