Can someone please clear this QoS concern for me. I'm having ytrouble understanding it 100%SWITCH_1 <--> 6500 <--> SWITCH_2Packet is assigned a DSCP Value of 46 on SWITCH_1The 6500 receives the packet on ingress from SWITCH_1.The port state is set to...
I have ACS 4.2 configured to authenticate Windows clients using PEAP. ACS is setup to check Active Directory to make sure the user and machine are valid.This process works fine but I want to be able to login as local admin (not part of active directo...
I am trying to allocate atleast 512Kbps to HREAP traffic but for some reason I get drops on my class-map cl_HREAP while class-default has no drops. I have a T1 and the link is barely used so I don't know why its dropping traffic? Does it think its a ...
When I want to limit traffic using MQC on a router with the police command I get 3 options.# police [ bps , cir , rate ]I know bps but whats the different between bps, cir and rate? Doesn't it all do the same thing?
I have a Cisco 2811 with NM-32A. I setup all my hosts properly but when I connect the screen fills up with all giberish.I get this output everytime I connect to a new router and eventually get the command prompt. -------------------------------------...
The administrator account comes from AD. The domain "administrator" logs in and 802.1x authenticates the username which came from DOMAIN_XNow I try to login on the local machine account, not using domain and I can't authenticate. Now the credentials ...
If I do show queuing, I see that I'm using 630 Kilobits of available bandwidth, this may be the issue but where do I mention to use 1500 or atleast 1100 Kbps being 75% of that? Where is it getting this 630 Kbps calculation?3845#show queueing interfac...
I tried all different baud rates and different settings. I'm using a Belkin usb to rollover cable adapter on my laptop. I have no problem conencting this to an asa but this 851 is just not responding.I will try to cycle the power and see if I see any...
