Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Not sure how this all works as cisco licensing is sometimes more difficult than getting the product itself running. I'm doing a unity 5.0 to unity connection 8.x migration. It looks like what was ordered was the unity upgrade (CON-ESWUNITY8V & UNITY8...
Current Setup:User Token & PIN authenticates to -> ASA5510 8.2 Clientless VPN -> passes to RSA Auth manager 7.2 via SDI.I've got authentication working great, on first login users can sign in with their AD user names and RSA tokens and generate thei...
Relevant Hardware Cisco:CUCM version: 6.1.1.3000-2MGCP Gateway - 2811VIC2-4FXOGate Entry System:Sentex - Crown Jewel Systemhttp://www.sentexsystems.com/pdfdocs/6001145.pdfIssue:After some tweaking i've been able to call into my CUCM through the FXO p...
I'm in the process of adding a T1 to a current voice gateway and have a question on some of the slots on a 2851.Current module Use:Interface Card Slots: - 2 vic-4fxo - 1 vwic2-2mft-t1 - 1 vic-4fxs/didAlso theres an NM-HD-2VE with 2 x vic-4fxs/DID ...
I'm having an issue using a destination nat. I'm not sure if this is the best way to do it.I have a static nat in place mapping a public ip 10.10.10.1 to internal ip 192.1.1.1. All is working well.Howerver I need the public ip 10.10.10.1 to be access...
Alright, I scoured the interwebs and found the solution. Thought I'd post it hear incase anyone has the same issue or if Bo Bo has been waiting for the answer for 3 years and has been patiently waiting for help. Most search results say use 8.5.2 as a...
Bo..
Did you ever figure this out? Same exact issue here. After factory reset/flash reformat i get the same issue.
Regardless of what sccp firmware i try all i get is the phone down loads the default loads file twice. Then sits for a while, reboots...
Soeren,I have the same exact issue you've listed here. I have a few server 2008 R2 servers and the only one with terminal services role installed wont allow me to connect with the active x plug-in without adding the sslvpn url to the trusted sites li...
Also agree with Stuart and others. A software update should be free, If the software it shipped with was free of defects then no updates would be needed. Auto manufactures fix their defects for free (recalls) and they're alot more labor intensive and...
