About glenne nelson

glenne nelson · 09-18-2018

Hi All, A "show int summary" on 2960 X and 3850's across our enterprise shows output queue drops on all devices irrespective of IOS levels. On the 2960X's " show int Gi/3/0/13" output shows the same drops (19287)as "show mls qos int Gi3/0/13 statisti...

glenne nelson · 12-16-2015

Good Afternoon, We are using Cisco DCNM Prime 6.2(3) mostly for zoning purposes and will be upgrading our nexus 5K platforms from 6.x to 7.x OS. Can anyone say if DCNM Prime 6.2(3) will manage the 5K platforms running 7.x NX-OS. Looked everywhere o...

glenne nelson · 10-02-2015

Hi All, bit of of a "Hail Mary" to begin with as I'm not sure if I'm in the right area. We had a voice network that was purely Cisco (phones and switches)and the QOS on the network was based on autoqos generated markings with quite a bit of tweaking....

glenne nelson · 02-19-2015

Hi, I'm trying to find the BSSID for AP's on our campus. Using both Wireless Lan Controllers (WLC) and Cisco Prime, I just cannot find where the BSSID is evident. It is configured and used because a client has requested the information for BSSID all ...

glenne nelson · 09-03-2014

Hi,I'm upgrading a 3850 stack running IP services from 3.2.3SE to 3.3.3SE. When I upgrade using the standard universal image, will the IP Services features be retained or will I have to re-invoke the licensing. Additionally wll this command upgrade a...

glenne nelson · 02-11-2019

Good Afternoon, I am also thinking of upgrading from 6.3(2) to 10.3 (x) but haven't' found any pertinent documentation yet. I see there are no response to you post, have you upgraded already.

glenne nelson · 09-18-2018

Hi,Thanks for the prompt response, I've identified that the 3850's use the show platform qos xxxx format, however, "show platform qos interface xxx statistics" shows the [output] drops on that interface but not the queue[s] where the drops are taking...

glenne nelson · 12-16-2015

Apologies Folks, I was given incorrect information, we are actually running DCNM Prime 6.3(2) not 6.2(3) and the documentation says that this will support Nexus 7.x code so I don't have an issie. Regards.

glenne nelson · 10-05-2015

Thanks for the links Manish, however, the information is predominantly about wireless which we will have to deal with later, at the moment our focus is on the wired environment with a mixture of Cisco and LYNC 2013 voice and video.Group policies are ...

glenne nelson · 03-03-2015

We've told them, but users expect want everything over wi-fi.

Member Since	‎08-31-2011 02:46 AM
Date Last Visited	‎04-05-2019 05:36 AM
Posts	31
Total Helpful Votes Received	3

User Statistics

User Activity

Troubleshooting Output Queue drops on Cisco 3850 Platforms

Does DCNM Prime 6.2(3) support nexus 5K running 7.x OS

QOS Classification and Policing for Mixed LYNC 2013 and Cisco Environment.

BSSID information

Cisco 3850 Stack IP Services Upgrade

Re: Upgrading DCNM - From 6.3(2) to 10.3(1)

Re: Troubleshooting Output Queue drops on Cisco 3850 Platforms

Apologies Folks, I was given

Thanks for the links Manish,

We've told them, but users