Hi I useLMS 4.2, In fault Monitor I have the folowing messages : Event_DescriptionStateNotNormalDevice IP10.92.8.142Device TypeSwitches and HubsFault Last Updated At17-Nov-2013 12:36:25ComponentPWR-I@/2058 [Sw2, PS1 Faulty, RPS NotExist]Component Cla...
Dear all,I have a strange behavior between a WLC 5508 (version 7.0.116.0) and NEXUS7010.WLCThe WLC is configured in DHCP Bridging Mode (it sends DHCP requests without change)NexusThe VLAN interface is configured as followsinterface Vlan501 ip access...
Hi,I wish you a good year 2010I have a 6506 with 2 WS-X6K-SUP2-2GE (in slots 1 & 2). Card in Slot1 is active and card in slot slot2 is standby. All LEDs are green in card 1 (that's normal) On the Card 2 (redundancy card) The Status and System LEDs a...
