About cblaney

cblaney · 10-28-2014

Hello, I am trying to modify the displayed CLI on my phones for international calls from the SIP provider we are using, they are sending international calls CLI in the format sip:+XXXXXXXXXXX@anonymous.invalid, I'd like to replace the "+" with "90...

cblaney · 09-01-2013

Hello, Does anybody know if I have come across a bug. I have for many years been running BGP over a dual hub IPSEC DMVPN network, the DMVPN network is a backup to a private WAN provider MPLS network, route selection is made by a shorter AS path on ...

cblaney · 08-18-2009

Hello, Has anybody else come across this issue ? I cannot get an IP address from my DHCP server when I am connected to a WAP 200 that is operating as a repeater. I have worked around this by turning off the WPA encryption, so I assume that means my...

cblaney · 10-28-2014

Hi, This is what I normally do on ISDN :-voice translation-rule 100 rule 1 /^/ /900/ type international international rule 2 /^/ /9/ type national national rule 3 /^/ /9/ type unknown unknownBut this being a SIP I am trying :-voice translation-rul...

cblaney · 10-28-2014

Hi its a CUCM 9.5.

cblaney · 10-19-2009

Hi, The IP addressing is static, the "main" WAP that is physically connected to the LAN is 192.168.1.245, then the other 2 are .246 & .247I configured them all to work independantly to make sure the wireless setting were correct, then switched them ...

cblaney · 10-14-2009

Hi Lukasz, I found the issue to be wireless channel selection. Mine were all set to auto, but fixing the Channel to be the same on all the WAP's resolved the issue.Thanks Carl

cblaney · 08-18-2009

Darren,Thanks for your answer. I have a WAP200 plugged into a Catalyst 3550, than in turn connects to a 2811 router that is running a DHCP server with a 192.168.1.x scope.I set up WPA wireless encryption on all of the units to ensure the credentials...

Member Since	‎10-16-2007 08:40 AM
Date Last Visited	‎12-07-2022 12:03 AM
Posts	9

User Statistics

User Activity

How to add 900 to the CLI of incoming international calls where suppliers sends in "+"

Router crash when starting BGP over a DMVPN network on IOS 15.

Linksys WAP200 Repeater DHCP issue

Hi, This is what I

Hi its a CUCM 9.5.

Re: Linksys WAP200 Repeater DHCP issue

Re: Linksys WAP200 Repeater DHCP issue

Re: Linksys WAP200 Repeater DHCP issue