I have a 3750E stackable swtch and I need to configure neflow on it.  Are there any IOS versions that support netflow on the 3750E?  Is there any possible to configure netflow on a 3750E?  I do not see any netflow commands available on the switch?

I had WCCP configured to route all HTTP traffic on my Internal VLAN into a new Blue coat device. Previously I had a older Blue Coat device that used the same WCCPconfiguration and that worked properly.The problem is since I cutover to the new Blue Co...

There is a PIX firewall and it has this configured on it.static (inside,outside) tcp interface 3389 192.168.1.250 3389 netmask 255.255.255.255 0 0 This line of code works ok for port 3389 but I want all tcp ports to be translated.  Not just 3389.  Ho...

How do you open a range of ports on the PIX Firewall CLI for the rules and NAT?We have this configured on our PIXstatic (inside,outside) tcp interface 3389 192.168.1.250 3389 netmask 255.255.255.255 0 0access-list 101 permit tcp any host 173.13.28.14...

I have an IOS upgrade scheduled on a 2800 router and I have to erase the present IOS.  This is a remote location.I am worried that if the new IOS does not work properly that the router will boot in rommon mode.I would still have access to the router ...