Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
we have a requirement to run PIM adjacency between a firewall and nexus in VPC environment , firewall connected to nexus by using VPC port channels and VLAN SVI is used to establish PIM adjacency.As per configuration guide this PIM adjacency curr...
Hi,Anyone faced issue when following below TAC document on FTD HA upgrade ? , it looks like readiness check notsupported in HA configuration and a bug filed for the feature (CSCvm11203), but wondering why upgrade documentmentioning otherwise?FTD HA U...
Hi Everyone, Any one successfully activated smart license using offline SLR method ? How do we generate Smart license Specific reservation request code on Catalyst 9300 switches running in IOS 16.9.3 ? Regards,Dileep
Hi,
I am looking for a stable version of Async OS 11 for ESA C390 , appliances are currently running on 10.0.1 and plan to use following MD path for upgrade.
10.0.1-087-> 10-0-2-020 -> 11.0.1-027 -> 11.0.2-037.
I saw many posts regarding kerne...
Hi ,I am trying to configure a site to site VPN between a 7200 series router and an ASA.These devices already have one RA VPN configured on them. In IOS router I used ISAKMP profile and gave lower sequence number for site to site crypto map. After th...
see below nexus 5K IGMP snooping sectionhttps://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/IGMPSnooping.htmlPlease the explanation for the terms.IGMP Snooping"The IGMP snooping softwar...
Hi Felipe,You may need to either disable IGMP snooping or configure IGMP querier IP for the VLAN.Configure under vlan configuation.Nexus(config)# vlan configuration XXXNexus(config-vlan-config))#ip igmp snooping querier X.X.X.XorNexus(config)# vlan c...
Hi Jason,It only supported on a orphan port, still no support for VPC connection as per below comment under "Table 1: Routing Protocol Adjacencies Supported over Physical Interfaces" section."Although L3-A is supported as an orphan port, PIM adjacenc...
Just want to update to you all, i have opened a case with TAC , now FTD HA upgrade document and bug details (CSCvm11203) have been updated. There is also another issue you will run into when try to run readiness check in CLI in FTD HA pair, you have ...
You can use following guides: Install and configure firepower ASA service module.https://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configure-firepower-00.html FMC initial configurationhttps://www.cisco.com/c/en/us/supp...
