Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Anyone faced issue when following below TAC document on FTD HA upgrade ? , it looks like readiness check notsupported in HA configuration and a bug filed for the feature (CSCvm11203), but wondering why upgrade documentmentioning otherwise?FTD HA U...
Hi Everyone, Any one successfully activated smart license using offline SLR method ? How do we generate Smart license Specific reservation request code on Catalyst 9300 switches running in IOS 16.9.3 ? Regards,Dileep
Hi,
I am looking for a stable version of Async OS 11 for ESA C390 , appliances are currently running on 10.0.1 and plan to use following MD path for upgrade.
10.0.1-087-> 10-0-2-020 -> 11.0.1-027 -> 11.0.2-037.
I saw many posts regarding kerne...
Hi ,I am trying to configure a site to site VPN between a 7200 series router and an ASA.These devices already have one RA VPN configured on them. In IOS router I used ISAKMP profile and gave lower sequence number for site to site crypto map. After th...
Hi Everyone,I am facing an issue with RSPAN configuration where source and RSPAN destination vlan get blocked due to spanning-tree Port VLAN ID Mismatch error on uplink switch.Network diagram 3750E (IOS 12.2-55) 3750 (IOS 12.2-55)-----...
Just want to update to you all, i have opened a case with TAC , now FTD HA upgrade document and bug details (CSCvm11203) have been updated. There is also another issue you will run into when try to run readiness check in CLI in FTD HA pair, you have ...
You can use following guides: Install and configure firepower ASA service module.https://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configure-firepower-00.html FMC initial configurationhttps://www.cisco.com/c/en/us/supp...
Upon researching more on the topic, the firepower 6.2.2 release note suggests to run readiness check in CLI for HA and clustered device, but not sure about breaking HA is required in this case as suggested in bug. https://www.cisco.com/c/en/us/td/doc...
Hi, You can follow below procedure to activate SLR on catalyst 9300 switches. https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst_slr/b-169-9000-series-SLR-cg/b-169-9000-series-SLR-cg_chapter_00.html You may need to include your Cisco account...
Thanks for the reply. The smart licensing configuration document for the release 16.9.X does not have license reservation steps and from IOS 16.9.1 onward only supported license model is smart , no more right to use licenses. I am checking with TAC ...
