Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a CUE that is integrated to CallManager 7.x and has option 1 setup for "dial by extension". How does the CUE present extension numbers to CallManager? I don't know if this is possible, but what I would like to do is have the ability to setup a...
CME with CUE integrationMy senario is the same as this example:"For example, suppose caller A calls subscriber B's extension, which forwards the call to subscriberC, who does not answer the phone. The call goes to voice mail. Subscriber B's extension...
One of my locations has a 2821 MGCP gateway with loopstart FXO trunks. Incomming calls are plar to AA in the CUE. My problem is if the inbound caller hangs up before speaking to a live person (listening to the AA), the FXO port on my gateway will sta...
I have installed the intercom service and have it working. What I would really like to do is when the initiator presses exit, the receivers phone exits (speaker/mute light goes out) as well. The application has the ability to turn on the receivers sp...
I've started receiving the following error message "MediaResourceListExhausted" but not sure why...when I look at alert detail in Cisco RTM is says the following:"MediaResourceListExhausted Originated from CallManagerDevice Name: NULL_LISTDevice Type...
Doh! = ( that's what I was afraid of...TAC is looking into this as well as they say it should be supported, but I assume they'll come back with the same answer.Can you elaborate on "it needs to be reflexive"? - Thanks!
single nic, edge is outside my network with public ipI believe it was the same issue Mike = ) The issue where my call connect successfully but not video/audio is passed. My edge talks to control to setup the call, but when my control comes back to th...
