Does anyone understand why a Mutlilink interface would stay up but stop responding to a ping _for_approx_60_secs_ when any of the individual T1 interfaces in the bundle go down? The output of "sh int multi2" indicates that packets are flowing ou...
i've just upgraded to asa 8.0 and ASDM6. Everything seems to be working fine except the ADSM. Any thoughts?myasa01# sh verCisco Adaptive Security Appliance Software Version 8.0(4) Device Manager Version 6.1(5)51Compiled on Thu 07-Aug-08 20:53 by bu...
For simplicity's sake let's say that i have 2 7206VXRs running advip-12.4(9)T2. They're in separate cities, each has a direct Internet feed plus a L2 feed between them. Each one is a PE, and running L3VPNs for customers. I use OSPF as an IGP. Every...
I'm seeing a pvc which is showing ATM cells and IP packets in, but 0 OAM and 0 cells/packets output. Note that there are 2 other pvcs on the BVI and both of them seem to be working fine. This is PA-A3-T3 on 7206 VXR. My understanding is that if ...
In the context of a small hosting company we have a 7206VXR, a WS-3524-XL switch, and customers connected to access ports on the switch. I'd like to provide customerA on port Fa0/1 1mbpsx1mbps, customerB on port Fa0/2 3mbpsx3mbps etc. Right n...
I agree. I'd block all outbound smtp except from specifically permitted IP addresses. Of course this means you'll need static addressing on the NAT side and need to apply the ACL to the "inside" interface. -Chris
I'm running a 7200 with 12.(9)T2. Bug ID CSCek75294 is close, but the hardware doesn't match. (i've tried both PA-MC-4T1 and PA-MC-8T1 on the 7200 side and a 2600 with NM-4T and 2821 at the far end). Thanks anyway though. I'll keep searching.
I'm experiencing a similar issue with a 7200 chassis. It worked before the router crashed and reloaded. Was there ever any resolution to this? I realize it was some time ago....