About amadeusri

amadeusri · 02-06-2008

I am trying to throttle a single port on a Cisco 3560 Cat swith running Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(25)SEE2 to 5Mb, can someone provide me with links to where I need to look or possibly some short directions?...

amadeusri · 01-22-2008

I just recently set up a 7971 and the phone shows 'private' on all calls, internal and external. The same extension is on another phone and caller id works with that one so it leads me to believe it is something with the phone. I am using Software Ve...

amadeusri · 11-05-2007

I am implementing a new network and ip subnet where I work. The problem is that one User needs to have a static IP to our mother corporation but I cannot get the static NAT to work. My question is, will having this;nat (inside) 1 10.1.0.0 255.255.0.0...

amadeusri · 10-02-2007

Hi all, Im trying to set up a 6509 with a FWSM and am having some trouble. I have most of the config set up and working, I can ping from inside of the 6509 to a cisco 3750 that is connected on the outside with a L3 SVI with ip 192.168.113.10(represen...

amadeusri · 08-28-2007

Hi all, Im very new to configuring networking equipment (only been working with it for about 8 months) and I have been given a cisco 6509 with the fwsm to configure. The problem is I cant get it to work properly and was wondering if there was anywher...

amadeusri · 02-11-2008

Thank you for all the help, it is much appreciated.

amadeusri · 01-23-2008

This was solved. I had to recreate the CNF files on cme. Thanks for the time.

amadeusri · 10-03-2007

Thank you, thats what I thought was going to be the problem. The 192.x.x.x addresses actually represent public addresses on the network where I work, we are trying to do a network migration to private addresses (10.1.x.x.) but would need to still be ...

amadeusri · 10-02-2007

I have a workstation sitting on the inside network with ip address 10.1.0.50. Is there a way to have NAT setup so that the internal computers can access outside networks but also be reachable from the outside?What Im saying is I dont want to have sta...

amadeusri · 09-28-2007

First let me say thank you, you have helped me figure a couple things out. Now for the next problem... I have Vlan 10 setup as a SVI since there will be routing between vlans on the inside of the network. Right now I have a Cisco 3750 switch with a l...

Member Since	‎04-10-2007 11:40 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	21

User Statistics

User Activity

Port traffic throttling

7971 showing Private on caller id for all calls

Quick NAT question

Firewall Services Module blocking traffic when it should be allowed

6509 configuration with FWSM

Re: Port traffic throttling

Re: 7971 showing Private on caller id for all calls

Re: Firewall Services Module blocking traffic when it should be

Re: Firewall Services Module blocking traffic when it should be

Re: 6509 configuration with FWSM