Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I hope someone can provide some help, I need to deploy a CSM module for the purpose of Disaster Recovery, the objective is to be able have a standby server in site B so when the server(s) in site A fails to have the CSM direct all traffic to the stan...
I hope someone can provide some help, I need to deploy a CSM module for the purpose of Disaster Recovery, the objective is to be able have a standby server in site B so when the server(s) in site A fails to have the CSM direct all traffic to the stan...
Hi, I hope you can help, the attached diagram shows overall what my network consist of, I understand cisco phones mark packets via DSCP marking, where else in the network do I need to apply QoS for this marking and also RTP? (L3 or L2 interfaces, bot...
Hi, thanks to all in advance, I hope you can help, this the situation: My company just purchased a list of devices which include:IPVC-3515-MCU12CISCO2851IPVC-3527-GW1PNow, I have no experience with Video Services deployment, where do I start? what ar...
Hi, I hope someone can help, we are deploying EMC's SRDF product to replicate data across our DR site, one requirement from EMC was for us to configure specific VLANS for the IP traffic to be then routed across the WAN, has anyone deployed this usin...
Syed,Thanks for your response, in my case the standby server will be located on a different subnet 2 hops away from the active real servers, can this still be done? so the real server IP is for instance: 10.20.30.10The standby server real IP address...
Jon,Thanks for your explanation, to put it in simple words then, the "client Vlan" is where the VIP for the server farm will be placed (vserver) and will have an SVI on the MSFC, the "server Vlan" is the Vlan where the real servers are located, these...
Lamav, the static statement was removed because of the problem it was causing and yes, the dynamic default was being learned (looked at the EIGRP topology tables) but the floating was being installed in the routing table...this the actual default rou...
