Hi Everyone,
I've been going back and forth with this, and Cisco's verbiage is pretty vague. I was hoping someone here could help clarify.
I don’t know if there’s a difference between Cisco approved OEM dimms (with or without a Cisco label) and...
Hi all,
I have a question about this card, Intel XL710-QDA2 (UCSC-PCIE-I404NIC) and connecting to an Arista switch.
Are these cards compatible? There is not much out on these, I found a document stating it was a supported adapter but its missin...
I've noticed Cisco offers a replacement rack ear kit for the C220-M4s, but havent been able to find anything on the C240 stuff.
The 24bay M4SX has the console port on the right side ear. Any ideas?
Cheers!
Hey all,
Any input would be appreciated with this one. I'm wondering if it's just a major hardware failure that is causing the Bios to not finish post or if its possibly a firmware bug.
Please see the attached.
Thank you for your time!
Can you please help me, I cant seem to sort out an issue I’m having.
Trying to associate a service profile to a B200-M3 blade with a ViC 1240 adapter.
it is failing at 25%
Remote Invocation Result: End Point UnavailableRemote Invocation Error Code...
Have you checked to make sure you have a valid configuration?
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4/raid.html
hi, see the link below:
https://supportforums.cisco.com/t5/lan-switching-and-routing/intel-x520-n2xx-aipci01-compatibility-with-cisco-sfp-10g-s-l-r/td-p/2958261
Hi,
Same as above, 3.1x firmware saw the deprecation of the M81KR card. The newest supported firmware is 2.2(8i)
3.1(1e)
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-3-1.html#reference_D8E0F1697D...
Hi VirtualStorageGeek,
Are you trying to upgrade as a standalone server or UCSM?
HUU:
https://software.cisco.com/download/release.html?mdfid=284296254&flowid=31743&softwareid=283850974&release=3.0(3a)&relind=AVAILABLE&rellifecycle=&reltype=l...