F0313 Bios Failed power-on self test

[Tyler P]

Hey all, 

Any input would be appreciated with this one. I'm wondering if it's just a major hardware failure that is causing the Bios to not finish post or if its possibly a firmware bug.

Please see the attached.

Thank you for your time!  

[Wes Austin]

Hello,

What model of server is this? What firmware version is it running? Was it working before and just stopped booting or has this never worked as expected?

Need a little bit more information on the setup to determine one way or another if its hardware failure.

Wes

[Tyler P]

Hi, 

Its a UCS Mini with 2 x 6324s running 3.1.1g firmware packs. The blades are B200-M4 with 2690 V3s. 

The blades worked before in lab but are having issues after being sent to the DC.

[Wes Austin]

If you go to the general tab on the server, under Actions, there should be a "POST results" button that could provide further information.

Is the behavior consistent after decommissioning and re-acking the server? Is this the only server having the problem?

You should be able to launch the KVM and see if any outputs are displayed. Otherwise, I would suggest opening a TAC case for further investigation.

Wes