Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I have 7204-G2 with IOS "c7200p-advipservicesk9-mz.124-15.T5.bin"I write very simple vxml app, but it wont work.Log-----------------------------------------------Log Buffer (128000 bytes):Nov 14 15:01:32.906: %CALL_CONTROL-6-APP_NOT_FOUND: Applica...
HelloI need to change "sdm prefer" on my catalyst 3550 to default ,but in command selection I don't have "default" value:3550(config)#sdm prefer ? access multicast and qos/acl bias, drop unicast extended-match Using extended match f...
I have 4948 switch with "12.2(31)SGA1" IOS (Conf reg is 0x2101). When I reload switch its boot without any errors.Now I need to upgrade it to "12.2(31)SGA4".My configuration is:boot-start-markerboot system flash cat4500-entservices-mz.122-31.SGA4.bin...
I have NAT users with traffic collection for them.I using mechanism with Route map+loopback. I want migrate to "ip flow ingress/egress"Here my config:!ip cefinterface Loopback1 description Netflow ip address 172.19.3.1 255.255.255.0 ip route-cache fl...
Hi. I read docs about ISG configuration,but can`t fined main commands on my router, like "ip subscriber" "class-map type traffic " "policy-map type service".Here show ver:7204#sh verCisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Versio...
Here my new config:!boot-start-markerboot system flash flash:cat4500-entservices-mz.122-31.SGA4.binboot-end-marker!KT4948#sh bootvarBOOT variable = flash:cat4500-entservices-mz.122-31.SGA4.bin,1;CONFIG_FILE variable does not existBOOTLDR variable doe...
What you mean "twice as much statistic for traffic" ?Users connect between each other by local link,the question is only for Internet traffic (users<->NAT<->Internet) Here my scheme:ISP1 ISP2----------7204-G2---------F0/0.1143 ...
Hi againI changed IOS to ADV IPSERVICES but still cant fined any command to configure ISG. --------------------------------------------7204(config)#int f0/0.17204(config-subif)#ip s?sap security split-horizon summary-address7204(config-subif)#----...
