Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
We have a Air-AP2802 ap that is trying to connect to a wlc(set up on another 2802 Mobility Express). Software on the AP that is set up as the WLC is 8.3.132.0.
When connecting to the AP via console it seems like it get IP from the dhcp and di...
Hi all, I`m pretty new in the Cisco world so I`m hoping someone could help me out with an issue I`m having configuring a Cisco 1941 router. The thing is I`m having problems with getting any of the clients on my LAN to connect to the Internet. On the ...
Managed to get the AP to join the master. As soon as I updated the ap to the same version 8.3.132 it managed to join. Guess that if I now update the master to a newer version, the master will push the update out to the aps that are joined. Anyways, t...
Yes, We are running it as mobility express and not a dedicated WLC. All ap`s including the master are running version 8.3.132, and are working. We have received a new ap (2802) and are trying to get it to join the master. But as it is running version...
Thanks for feedback Sandeep,Will try and upload the same image running on WLC to a tftp server and update the AP that way. Will post the result.BRBjørn
Output from PRI command in u-boot:
u-boot>> priBOOT=part1CASset=maxENABLE_BREAK=1FACTORY_RESET=0MALLOC_len=5MANUAL_BOOT=0MEMORY_DEBUG=0MPmode=SMPautoload=yesbaudrate=9600bootcmd=nandbootbootdelay=3bootfile=board_init_barbados2k.imgcacheShare=nodisa...
Hi,
thanks for reply.
1. Both WLC and AP on same network or different subent?
* Same network
2. AP and WLC should be on same version? If not upgrade the AP to the same version...
* Shouldn`t the AP get the updated image from the WLC?
BR
...
