Hello,
I make some research without success concerning my question.
Do you know if it is possible to use lifetime, warntime or gracetime option on local username on Catalyst series?
I know it is possible on Nexus ( except user admin).
Thank ...
Hello,
I have a question concerning the upgrade of a couple of 5624Q without ISSU from 7.3(0)N1(1) to 7.3(2)N1(1).
When I did the show issu impact, I saw that there is BA activated ( because of spanning-tree type network), and 1 non edge port.
...
Hello,
I try to connect a parent 9332PQ with a FEX 2348UPQ.
The configuration is the following:
interface port-channel125 description FEX125 switchport switchport mode fex-fabric fex associate 125 vpc 125
!
interface Ethernet1/3 description FEX12...
Hello,
I have to upgrade 2 couples of Nexus 5624Q with FEX 2232PP and 2348UPQ from version 7.3(0)N1(1) to the recommended version 7.1(4)N1(1).
The BIOS version is 1.1.3.
I didn't find documentation concerning impact or incompatibility from this ...
Hello, I would like to have some confirmation concerning the upgrade of a VSS with 2 6506 (with one SUP card). I would like to upgrade from version 15.1(1)SY to 15.2.1-SY5. Question 1: I see that they are 2 different method (from more disruptive to l...
I think the best practice is to have the most information in less word as possible.Generally I use "Hostname-Card-Port".With this information you can troubleshoot faster.B.R.M.
Thank you for your return.I will do the show vpc consistency-parameters global.I have another question:I plan to upgrade first the primary and then the secondary, but what will be the behavior of different vpc when the primary go up after the upgrade...
Hello Georg,
Thank you for your answer.
It is clear.
But how I assign a phase 1 to a tunnel? In this example, I can see that phase 2 is assigned to tunnel0 but no mention of phase 1.
It work as following?
=> I create crypto isakmp policy and it t...