Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I need a Switch with 24x SPF+ Ports with 10Gbit. It should support Transceiver with Copper (1Gbit) and Fiber (10Gbit). The Connection is from 4x 10Gbit Core Uplink (6880) over the Switch to 12 Floors Access Switchs. A Switch with IOS-XE is p...
Hello,
we have a WLC5520 which is configured with the country code DE.
Our Distributor sent us new APs (40pcs): AIR-AP2802I-K-K9. After alot of research why DTLS Phase never ends, and the AP never joined the WLC, ive founded the "K" in the Modeltype....
Hello,
Ive installed the CDA on a Hyper-V Host. There is no choice for a VMWare Host. I know sadly, that this is not offical supported. Otherweise the CDA runs with just two problems which could be possible solved.
The NTP Service seems not running a...
That sounds like a job for NAT/PAT.
When its possible, you should build a Firewall as endpoint for your public IP and use
this one as gateway for your local IPs. NAT is a basic function from a Firewall/Router.
Your ISP should do the same for you at h...
Thanks for ur reply.What about WS-C3850-24XS-E?Didnt find any End-of-life notice, but it is listed rare.Is it not recommed and where is the difference to the 9500 series?
I took the "Korea" domain away and rebooted the AP. The AP joined the WLC and in the advanced Tab it was still the country code DE.
(WLC Image 8.5)
But after a few test, i noticed that I cant enable the 5ghz band with this AP(wtf?). So we will repla...
