Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys, just a short question.
We are implementing some projects that only have one L3 Switch.
Cisco told us to use IP Services for the ipv6 routing... but we only have 1 router...
In case we are using just a device for the layer3 and the rest are...
Hello,
We configured 13x (2700 series) and 2x (1532) APs with the controller IP. We sent them to customer, he installed them and the APs joined the controller, except the 2x 1532 APs.
This is the message I get for both of them: Failed to delete data...
Hello, just a short question.
We have 2 WLCs in China and the ISE Server is in Germany. There is between 200ms and 300ms latency between the Server and the WLCs.
We use CWA guest portal redirection. We are having troubles with the users in China, t...
Hello, I've been all day going through the internet trying to troubleshoot this but I couldn't fix it.
My setup:
Foreign WLC and Anchor WLC. (5508 and 2504) Software: 8.0.121.0 and ISE 1.2
Guest SSID with this config: https://supportforums.cisco.com/...
Thanks Mark.
We will have v15 or superior for sure.
The reason they gave us to use the IP-services was the dynamic ipv6 routing because we have IoT devices... but if they are only communication locally with this one l3 switch.... no need for dynamic ...
