Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
May 13 11:02:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/10, changed state to downMay 13 11:02:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/10, changed state to upMay 13 11:02:38: %SW_MATM-4-MACFLAP_NO...
What's the difference between a Catalyst 4500 and a Catalyst 4500E series chassis? I believe it has to to do with supporting PoE+? Are the blades in both series interchangable?
I'm trying to connect a 4500 switch to our existing network. We are connection using 10gig modules. The problem is when we connect the router to the switch the interface starts flapping and error disables itself. I walked the whole path looping the f...
When have approximately 30 AP1231G installed using authenication and some are having a problem with connectivity. The signal strength is usually excellent but the cloud in windows says "either little or no connectivity". They all have the same softwa...
I'm having a problem with some APs. Some of the APs will not authenicate until you are close to them. Others there's no problem. Sometimes my portable will ask for my credentials again and sometimes not. All APs have the same IOS version of Version 1...
We are actually replacing our 3750 with 4500's. What we found with the 3750s is we had problems with the stacking ports in the back. Also, if the stack master switch in the stack with the 3750's fail there is no indication that the network is down ex...
I think we found our problem. Someone added a second ethernet inteface to our radius server. When the user connected to the second interface through the AP the AP didn't recognize that as being the radius server so it didn't pass along the IP address...
- For authenication we are using WEP with a radius server- For NIC I'm using the Intel(R) PRO/Wireless 2200BG network adapter_ For the operational systems on users pc I know most are using Windows XPI hope this helps...
